Kodak EASYSHARE W820 - Manual (Page 60)

53 www.kodak.com/go/support
Using wireless mode
Copying wirelessly to/from your computer
The KODAK EASYSHARE Digital Display Software (included on the CD that was
packaged with your frame) lets you drag and drop (copy) pictures, videos, and music
wirelessly between your frame and computer or other connected devices (see
page 29 ).
Before you proceed:
1 Make sure you install the software packaged with your frame (see page 9 ).
Connect to your wireless home network (see page 5 ), then verify your computer
connection (see page 10 ).
Your frame can now access the content on your host computer, wirelessly.
NOTE: If you have more than one frame on your wireless network, give them unique names so you can tell
them apart. Go to Home
→
Settings
→
Device configuration menu. ( See page 59 .)
2 Make sure the USB connection mode on your frame is set to Computer (see
page 40 ).
3 Double-click (KODAK EASYSHARE Digital Display Software icon) on your
desktop to open the software.
The frame, memory card, and connected devices (see page 29 ) appear in the Drag and
Drop Zone.