beautypg.com

Technical data, Items supplied, Appliance description – Kompernass AUTOMATIC SHREDDER KH4407 User Manual

Page 5: Commissioning, Operation

background image

- 3 -

Tips for safety:

• Place the appliance in the immediate vicinity of

an electrical power socket. Do not use an exten-
sion cable. Ensure that the appliance and the po-
wer socket are easily and quickly accessible in
the event of an emergency.

• Never overburden the appliance. The paper

shredder is designed for brief operating
periods.

• In cases of danger, immediately remove the elec-

trical plug from the socket.

• NEVER use the shredder for tasks for which it

was not designed.

• Always be attentive! Always pay attention to

what you are doing and act with common
sense. Never use the appliance when you are
distracted or don’t feel well.

Technical data

Mains voltage:

220-240 V ~ 50Hz

Nominal current: 1,8 A
Rated output:

380 W

Protection class:

II

Cutting process
for Paper:

Crosscut, 4x18 mm particles

Working width:

223 mm

CO Time:

3 minutes

CO Time
The C.O. Time (Continuous Operation) details how
long an appliance may be used without the motor
overheating and being damaged. After the appliance
has run for for this period it must be switched off until
the motor has cooled itself down.

Items supplied

Shredder KH 4407
Operating Instructions

Appliance description

q

Cutter attachment

w

Switch

e

Cutter opening for CD/Credit cards

r

Cutter opening for paper

t

Large waste receptacle (Paper)

y

Power cable

u

Small waste receptacle (transparent) /
Viewing window

Commissioning

• First of all, place the cutter attachment

q

onto

the large waste receptacle

t

so that the power

cable

y

is located at the rear, i.e. on the closed

side.

• Slide the small waste receptacle

u

for plastics

in the opening on the front side of the large wa-
ste receptacle

t

.

• Connect the paper shredder to a power socket.

Operation

Switching the appliance on:
• Place the switch

w

to the position

for

shredding.

Inserting paper:
• Insert paper from above and in portrait format

into the cutter opening for paper

r

.

The motor starts automatically and switches itself off
automatically if no further paper is inserted. You
can shred up to 7 sheets (80g/m

2

paper) at the

same time.

IB_KH4407_E26057_LB6 20.03.2009 9:39 Uhr Seite 3