Keys Fitness Triumph 5.3e Elliptical TRI-5-3E - Manual (Page 8)

Assembly
8
4. Connect the Extension Wire (72) to
Sensor Wire (73). Next, connect the
Tension Cable (68) to the Tension Knob
(66). (Refer to Figure 4a on the next
page) Slide the Console Tube (3) onto
the Main Frame (1) and secure in place
using four Washers (34) and four Hex
Head Bolt (65).
Figure 4
3. Attach the Left Pedal (5a) to Left
Pedal Tube (4a) and secure in place
with two Hex Head Bolts (47), two
Nylock Nuts (49), and two Washers
(48). Next, insert the Left Pedal Tube
(4a) into the U Bracket (53) and use
Hex Head Bolt (50), Washer (48), and
Nylock Nut (49). Repeat previous
directions to complete the right side.
Figure 3 50
48
47
53
49
5a
4a
34
65
34
3
72
73
66
68
65