KITCHENAID Food Processor - Manual (Page 14)

14
ķ℀ĸ
• Before operating the food processor,
be sure the work bowl, blades and
work bowl cover are properly
assembled on the power base (see
page 12).
• The Clean Touch OFF/ON/PULSE
control pads take just a touch of your
finger for optimum control and
convenience in operating the food
processor. By touching the ON control
pad, the unit will run continuously
until you touch the OFF control pad.
• The PULSE control pad helps to
better regulate the degree of
processing. By alternately pressing
and releasing the PULSE pad, the
food processor will be quickly turned
on and off. This allows you to control
the exact length and frequency of
processing since the KitchenAid food
processor performs in just a matter of
seconds.
NOTE: If unit fails to operate, check
to be sure that both the work bowl
and cover are properly positioned on
the power base. See Assembling Your
Food Processor, page 12.
• To stop your food processor, press the
OFF control pad. Wait until the blade
or disc has come to a complete stop
before removing the work bowl cover.
Be sure you push the OFF pad before
removing the work bowl cover or
unplugging the unit.
AUTOMATIC BRAKE: When the
food processor is turned OFF, the
automatic brake stops the action of the
blade or disc within seconds. The brake
provides an additional measure of safety
as you remove the work bowl cover.
• Cut food to fit feed tube vertically or
horizontally. Pack feed tube securely
in order to keep food positioned
properly. Use the food pusher to apply
even downward pressure to process
the food.
Pulse
On
Off
CAUTION:
READ INSTRUCTIONS BEFORE USING
Operating Your Food Processor
Pulse
On
Off
CAUTION:
READ INSTRUCTIONS BEFORE USING
Rotating Blade Hazard
Always use food
pusher.
Keep fingers out of
openings.
Keep away from
children.
Failure to do so can
result in amputation or
cuts.
WARNING
!