Kawai CA-X - Manual (Page 13)

9 ADVANCED PLAYING
Advanced Playing
REVERB
Reverb adds reverberation to the sound, simulating the acoustic
environment of a recital room, stage, or concert hall. There are five types
of reverb available. They are Room 1&2, Stage, and Hall 1&2. (listed in
order of reverberation amount).
CHORUS
Chorus is an effect that simulates the rich character of a vocal choir or
string ensemble, by layering a slightly detuned version of the sound over
the original to enrich it.
DELAY
Delay is an effect that adds echoes to the sound. There are three types of
delay available (delay 1 - 3), each of which has a different length of delay
between the echoes.
TREMOLO
This is a vibrato type effect.
ROTARY
This effect simulates the sound of the Rotary Speaker cabinet commonly
used with electronic organs. Rotary 1 is normal rotary and Rotary 2 is
with distortion effect.
The soft pedal is used to change the speed of the rotor between SLOW
and FAST.
TO ADD REVERB
Press the REVERB button. The LED indicator will be turned on to
indicate that reverb is in use. Press and hold the REVERB button and the
currently selected reverb type will be shown in the display.
To change the reverb type, use the VALUE buttons while holding down
the REVERB button.
Room 1 Room 2 Stage Hall 1 Hall 2