Kenwood KVT-745DVD - Manual (Page 4)

English
4 English
Connection
If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground),
you may cause a short circuit, that in turn may start a fire. Always connect those wires to the
power source running through the fuse box.
2WARNING
B
C
B
C
( 5A )
PRK SW
A
– +
+
B
C
A
Ground wire (Black) - (To car chassis)
Battery wire (Yellow)
Ignition wire (Red)
ACC
Ignition key switch
Battery
Car fuse
box
(Main fuse)
Connect to the vehicle's parking brake detection switch
harness using the supplied relay connector.
For the sake of safety, be sure to connect the parking sensor.
2
CAUTION
Do not connect.
Monitor unit
Wiring harness
(Accessory
3)
Car fuse box
Accessory 4
Accessory 2
FM/AM antenna input
Battery wire (Yellow)
Dimmer control wire (Orange/White)
To car light control switch
Ground wire (Black) - (To car chassis)
Motor antenna control wire
(Blue)
Power control wire
(Blue/White)
External amplifier control wire
(Pink/Black)
Depending on what antenna you are using,
connect either to the control terminal of the motor
antenna, or to the power terminal for the booster
amplifier of the film-type antenna.
When using the optional power amplifier,
connect to its power control terminal.
To "EXT.AMP.CONT." terminal of the amplifier
having the external amp control function.