Setting the cutting depth, Setting the cutting distance / parallel guide, Statement of conformity – Kompernass PAHKS 18V User Manual
Page 8
www.kompernass.com +++ www.kompernass.com +++ www.kompernass.com +++
8
SETTING THE CUTTING DEPTH
Please note! If possible we recommend that the cutting depth is set to 5 mm greater than the
material thickness. This should help to ensure you achieve a clean cut.
Release the wing nut on the depth adjuster
ƻ
, set the required depth on the scale and retighten
the wing nut.
SETTING THE CUTTING DISTANCE / PARALLEL GUIDE
Release the wing screw
¹
on the parallel guide
¸
, using the marking set it to the required cutting
distance and retighten the wing screw.
STATEMENT OF CONFORMITY
We, Kompernaß Handelsgesellschaft mbH, Burgstr. 21, D-44867 Bochum, Germany, hereby
declare that this product conforms with the following EC regulations:
Machinery Directive:
(98/37 EEC)
EU Low Voltage Directive:
(73/23 EEC), (93/68 EEC)
Electromagnetic compatibility:
(89/336 EEC), (93/68 EEC)
Description / Model type:
PARKSIDE CORDLESS CIRCULAR SAW PAHKS 18 V
Bochum, 31.08.2003
Hans Kompernaß
- Managing Director -
4 GB +IRL PAHKS 2003 12.09.2003 12:03 Uhr Seite 8