Caution – Kobe Range Hoods CH7648SQB User Manual

Page 18

background image

16

To Replace Light Bulb

CAUTION

:

HALOGEN LIGHT UNIT MAY BE HOT! WAIT UNTIL UNIT IS COOL.









1. Make sure all controls are off, and range hood is unplugged.
2. Place a flat-head screwdriver between light cover and housing to remove cover .
3. Gently pull defective bulb straight out

and discard. Light bulbs should be 12V 20W

maximum.

4. Wear a cotton glove or use a cloth to handle the replacement bulb (do not handle with bare

fingers as this may shorten the life of the bulb). Push gently but securely into light socket.
NOTE: DO NOT PUSH TOO HARD AS BULB “LEGS” MAY BREAK OFF.

5. Replace light cover .
6. Turn range hood ON to test for operation.

See also other documents in the category Kobe Range Hoods Fans: