Kompernass KH 4412 - Manual (Page 6)

- 6 -
6. Suitable laminating
pouches
• For hot lamination you can use pouches with
a width of up to 230 mm and a thickness of
maximum 125 Micron.
• Please note that each laminating pouch may
only be used once.
For hot lamination, use only laminating
pouches that are expressly designated
for hot lamination.
For cold lamination, use only laminating
pouches that are expressly designated
for cold lamination.
Note that the laminating pouches in-
cluded with the laminator are intended
exclusively for hot lamination.
7. Operating levels
Tip: For high-gloss photos, select the switch setting
"125".
8. Preparing for hot
lamination
➩
Insert the pouch guide q into the holes provided
on the rear of the laminator.
➩
Fold apart the pouch guide q .
➩
Insert the laminator power plug into a power
socket.
➩
Ensure the appliance has a stable positioning.
➩
Switch the appliance on by flipping the ON /
OFF switch
e . The red ON / OFF Indicator
lamp t now glows.
Only activate the pouch thickness
switch
i when the appliance is
switched on.
➩
Shift the pouch thickness switch i to the de-
sired foil thickness (80 or 125 Micron). The
laminator now heats itself up to the operating
temperature.
• The laminator has reached its operating tempe-
rature as soon as the green LED indicator light
"Ready"
y glows.
Switch setting
Selector switch r
Switch setting
Foil thickness switch
i
Laminating foil
thickness
HOT 80 > 60 - 80
HOT 125 85 - 125
COLD 125 to 200
IB_KH4412_E6005_UK_6.qxd 18.09.2007 15:02 Uhr Seite 6