Kompernass KH 1282 - Manual (Page 7)

- 7 -
Connection
• Insert the power plug into a power socket.
Ironing
ƽ
During use, lay the steam iron aside only on its
back end
t or in the support tray provided on
the ironing board. Never lean the hot iron
against walls or other objects. There could be a
risk of fire breaking out.
Dry ironing is possible at all temperatures, steam iro-
ning is first possible from the level ••.
ƽ
Important!
If the clothing care instructions forbid ironing
(Symbol
), the clothing item may not be ironed.
Should you do so, you could damage the item.
• Check the care instructions on the labels in the
garment to see if it is suitable for being ironed,
and at which temperature setting.
• Select the best suitable temperature setting with
the temperature controller u
MIN MAX
Setting of the
Steam Iron
Type of Material
• Silk, Nylon
•• Wool
••• Cotton
Max Linen
The heating control lamp w glows. When the
heating control lamp w extinguishes, the selected
temperature has been reached.
• Wait until the heating control lamp w extinguis-
hes at the set temperature.
• Allow the steam iron to slide over the material
under light pressure.
Avoid ironing over zippers and studs, as these
can scratch the sole of the iron
i . Pass around
them when ironing.
Steam ironing
• Programme the steam controller s to the desired
steam setting:
If you have adjusted the temperature controller u to
the setting ••, always move the steam controller s
to the small steam symbol.
If you have adjusted the temperature controller u to
the setting •••, always move the steam controller
s to the large steam symbol.
Note: Steam ironing is first possible from
setting ••.
Notice: Should steam no longer be required,
or the setting be adjusted to a temperature lo-
wer than ••, always turn the steam controller
s to position “0”! Otherwise, water could
leak from the ironing sole i .
IB_KH1282_E5554_UK_4 11.09.2007 13:34 Uhr Seite 7