Changing the slide show display interval, Running a continuous slide show loop, Displaying pictures and videos on a television – Kodak CX7330 User Manual
Page 35
Reviewing pictures and videos
28
Changing the slide show display interval
The default interval setting displays each picture for 5 seconds. You can
increase the display interval up to 60 seconds.
1 On the Slide Show menu, press
to highlight Interval, then press the
OK button.
2 Select a display interval.
To scroll through the seconds quickly, press and hold
.
3 Press the OK button.
The interval setting remains until you change it.
Running a continuous slide show loop
When you turn on Loop, the slide show is continuously repeated.
1 On the Slide Show menu, press
to highlight Loop, then press the OK
button.
2 Press
to highlight On, then press the OK button.
The slide show repeats until you press the OK button or until battery power is
exhausted.
Displaying pictures and videos on a television
You can use an optional audio/video cable to display pictures and videos on a
television, computer monitor, or any device equipped with a video input.
(Image quality on a television screen may not be as good as on a computer
monitor or when printed.)
NOTE: Ensure that the Video Out setting (NTSC or PAL) is correct (see
). The slide show
stops if you connect or disconnect the cable while the slide show is running.
1 Connect the optional audio/video cable from the camera video-out port to
the television video-in port (yellow) and audio-in port (white). See your
television user’s guide for details.
2 Review pictures and videos on the television.