Keys Fitness Health Trainer CLASSIC HT-CLASSIC - Manual (Page 5)

Assembly
5
The Health Trainer CLASSIC Treadmill will require assembly before operating. After opening
the box, remove any packing material from the treadmill.
Do not throw away any packing materials until the unit is working properly.
Place the base on a clean, level surface. Make sure the electrical cord will easily reach an elec-
trical outlet.
Locate the hardware pack and identify the following parts required for assembly.
Parts List:
1. Owner’s Manual
2. Base Assembly
3. Console Assembly
4. Left and Right Upright
5. Safety Key (Reed Switch)
6. Left and Right Fender
7. Left and Right Outside Handle Covers
8. Left and Right Inside Handle Covers
9. Allen Wrench
10. Phillips Screw M6x12 (Qty. 6)
11. Phillips Screw ST4.2x13 (Qty. 8)
12. Allen Bolt M8x15 (Qty. 8)
13. Washer 9x22x2 mm (Qty. 8)