Specifications – KORG TONEWORKS AX3A User Manual

Page 12

❑

Is the master volume turned down? Set the function selector to
[PROGRAM], and turn the value knob to adjust the master vol-
ume.

3. Effects don’t apply

❑

Could an effect be bypassed?

❑

Is the modulation “DEPTH” or the delay/reverb “MIX” set to a low
value?

❑

Could the [MIC&BODY] DEPTH be set to 0?

❑

Is the AX3A in Bypass mode? Refer to “Bypass and Mute” (p.10)
and cancel the Bypass function.

4. High frequencies are distorted when using [MIC&BODY]

❑

Depending on the guitar you're using, the high frequencies may
distort if the [TONE] TREBLE or XCITER effect parameter val-
ues are raised excessively. If this occurs, lower the settings.

5. Sound connected to the guitar amp is distorted, or sounds

wrong

❑

Could the [TONE] values or the PROGRAM LEVEL (LEVEL/NR/
NOTCH) be excessively high?

Specifications

Number of effects:

Pre-effect types: 10
Mic&Body Model types: 10
Tone: 1
Notch Filter: 1
Modulation Effect types: 10
Delay Effect types: 5
Reverb Effect types: 5
Noise Reduction: 1

Number of programs:

80 (40 user/40 preset)

Audio input:

INPUT (mono)

Audio output:

OUTPUT (stereo)

Signal processing:

A/D conversion: 24 bit
D/A conversion: 24-bit

Sampling frequency:

31.25 kHz

Tuner:

Detection range : C1–E6

Calibration:

A=438–445 Hz

Power supply:

Four alkaline AA batteries (continuous use
of eight hours) or DC9V (separately sold)
AC adapter

Dimensions (W

H):

178

142

43 mm /

7.0

5.6

1.7 inches

Weight:

340 g / 11.99 oz.

Included items:

Owner’s manual

Options (separately sold):

DC9V AC adapter

EXP-2 foot controller
XVP-10 expression/volume pedal

* Specifications and appearance are subject to change without notice for improve-

ment.