Keys Fitness 520U - Manual (Page 7)

5
55
19
54
45
59
19
55
56
5. Connect the Extension Wire (54) in the Upright Post (56) to
the Sensor Wire (45) in the Main Frame (1). Slide the Tension
Cable (59) from the Main Frame (1) up through the Upright
Post (56). Connect the Upright Post (56) to the Main Frame
(1) using Hex Bolts (55) and Arc Washers (19).
6. Pull the Tension Cable (59) out of the Upright Post (56) and
connect to the Resistance Knob (58) as in Steps 1 and 2:
Step 1: Put the Tension Controller cable end into the spring
hook.
Step 2: Pull the Tension Controller cable into the gap of
the bracket. Insert the Tension Controller (58) into
the Upright Post (56) and connect with the screw
attached (57).
57
56
54
59
58
6
58
59
59
58
E
10 11