Kenwood NEXEDGE NX-800H - Manual (Page 2)

All accessories and options may not be available in all markets.
Contact an authorized Kenwood dealer for details and complete list of all accessories and options.
Options
NX-700(H) K NX-800(H) K
GENERAL
Frequency Range
Type 1 136-174 MHz 450-520 MHz
Type 2 400-470 MHz
Number of Channels 512
Zones 128
Max. Channels per Zone 250
Channel Spacing Analog 12.5 / 15 / 25 / 30 kHz 12.5 / 25 kHz
Digital 6.25 / 12.5 kHz 6.25 / 12.5 kHz
Operating Voltage 13.6 V DC ± 15%
Operating Temperature Range -22˚ F to +140˚ F (-30˚ C to +60˚ C)
Frequency Stability ± 1.0 ppm
Antenna Impedance 50 Ω
Dimensions (W x H x D) Projections not included 6.30 x 1.77 x 6.18 in (160 x 45 x 157 mm)
Weight (net) 3.04 lb (1.38 kg)
FCC ID K Type 1 K44378600 K44378700
K Type 2 K44378701
HK Type 1 K44378601 K44378702
HK Type 2 K44378703
IC Certification K Type 1 282F-378600 282F-378700
K Type 2 282F-378701
HK Type1 282F-378601 282F-378702
HK Type 2 282F-378703
NX-700(H) K NX-800(H) K
RECEIVER
Sensitivity
Digital @ 6.25 kHz (3% BER) 0.20 µV
Digital @ 12.5 kHz (3% BER) 0.28 µV
Analog (12 dB SINAD) 0.25 µV
Selectivity Analog @ 25 kHz 80 dB
Analog @ 12.5 kHz 70 dB
Intermodulation Analog 75 dB (±50,100 kHz)
Spurious Response Analog 90 dB 85 dB
Audio Distortion Less than 3%
Audio Output 4 W / 4 Ω
TRANSMITTER
RF Power Output Mid Power
30 W to 1 W 30 W to 1 W
25 W to 1 W (490-520 MHz)
High Power 50 W to 10 W 45 W to 10 W
40 W to 10 W (490-512 MHz)
35 W to 10 W (512-520 MHz)
Spurious Response 73 dB 75 dB
FM Hum & Noise Analog @ 25 kHz 50 dB
Analog @ 12.5 kHz 45 dB
Audio Distortion Less than 3%
Modulation 16K0F3E, 14K4F1D, 11K0F3E, 8K30F1E,
8K30F1D, 8K30F7W, 4K00F1E,
4K00F1D, 4K00F7W, 4K00F2D
MIL Standard MIL 810C MIL 810D MIL 810E MIL 810F
Methods/Procedures Methods/Procedures Methods/Procedures Methods/Procedures
Low Pressure 500.1/Procedure I 500.2/Procedure I, II 500.3/Procedure I, II 500.4/Procedure I, II
High Temperature 501.1/Procedure I, II 501.2/Procedure I, II 501.3/Procedure I, II 501.4/Procedure I, II
Low Temperature 502.1/Procedure I 502.2/Procedure I, II 502.3/Procedure I, II 502.4/Procedure I, II
Temperature Shock 503.1/Procedure I 503.2/Procedure I 503.3/Procedure I 503.4/Procedure I, II
Solar Radiation 505.1/Procedure I 505.2/Procedure I 505.3/Procedure I 505.4/Procedure I
Rain 506.1/Procedure I, II 506.2/Procedure I, II 506.3/Procedure I, II 506.4/Procedure I, III
Humidity 507.1/Procedure I, II 507.2/Procedure II, III 507.3/Procedure II, III 507.4
Salt Fog 509.1/Procedure I 509.2/Procedure I 509.3/Procedure I 509.4
Dust 510.1/Procedure I 510.2/Procedure I 510.3/Procedure I 510.4/Procedure I, III
Vibration 514.2/Procedure VIII, X 514.3/Procedure I 514.4/Procedure I 514.5/Procedure I
Shock 516.2/Procedure I, II, III, V 516.3/Procedure I, IV, V 516.4/Procedure I, IV, V 516.5/Procedure I, IV, V
International Protection Standard
Dust & Water Protection
IP54: Radio itself
IP54/55: Remote head with KRK-10
Main Specifications
Applicable MIL-STD & IP
■ KMC-35
Microphone
■ KMC-36
Microphone
with Keypad
■ KMC-9C
Control Station
Desktop Microphone
■ KES-5
External Speaker
■ VGS-1
Voice Guide
& Storage Unit
■ KRK-10
Panel Remote Kit
■ KPS-15
DC Power Supply
■ KAP-2
Horn Alert
/ PA Relay Unit
■ KCT-23M
DC Cable (10 feet)
■ KCT-23M3
DC Cable (23 feet)
■ KCT-46
Ignition Sense Cable
■ KMB-10
Key Lock Adapter
■ KLF-2
Line Noise Filter
KCT-23M3
ADS#11409 Printed in USA
Kenwood has always connected with people through sound. Now we want to expand the world of sound in ways that only Kenwood can,
listening to our customers and to the pulse of the coming age as we head toward a future of shared discovery, inspiration and enjoyment.
Analog measurements made per TIA/EIA 603 and specifications shown are typical.
Kenwood reserves the right to change specifications without prior notice or obligation.
FleetSync ® is a registered trademark of Kenwood Corporation.
LTR ® is a registered trademark of Transcrypt International.
AMBE+2 TM is a trademark of Digital Voice Systems Inc.
Windows ® is a registered trademark of Microsoft Corporation.
NXDN ® is a trademark of Kenwood Corporation and Icom Inc.
NEXEDGE TM is a trademark of Kenwood Corporation.
footnotes from Front:
1 Requires NX subscriber unit PC Serial Interface compatible software application (e.g Kenwood AVL
& Dispatch Messaging software) or hardware (e.g. console).
2 These trunked features are primarily system programming and operational dependent. Priority
Monitor also requires NX subscriber settings.
JQA-QMA1205