Kenwood SK-70MB - Manual

Before you begin:
WARNING
MOUNTING BRACKET FOR LZH-70W OVERHEAD CONSOLE
SK-70MB
INSTALLATION
MANUAL
KENWOOD USA CORPORATION
• To minimize the risk of improper installation,
Kenwood recommends that the installation
of this product be performed by an MECP-
Certified professional installer. Improper
installation may cause damage to the
vehicle or injury to the driver and occupants.
• Installation must be performed according
to the product installation manual.
Kenwood is not responsible for damages or
injuries resulting from installation not
performed strictly in accordance with the
procedures described in the manual.
• This product is designed only to be used
with the LZH-70W overhead console.
• Use only new, unused and properly-sized
fasteners to install this product. Do not use
previously-installed or worn fasteners.
• No modifications to the product or
mounting hardware are permitted.
• The monitor screen that attaches to this
product must not be visible to the driver.
Viewing by the driver while operating the
vehicle will create an unsafe condition.
• This product must not obstruct the driver’s
rear view when installed or used.
• It is the responsibility of the purchaser and
installer to comply with all applicable laws
and regulations governing the installation
and use of this product.
• Kenwood disclaims all liability for any
property damage or personal injury that
may result from improper or unintended
installation or use of this product.