Kodak COOLPIX S5 User Manual

Page 92

chnical Not

Display

Problem

Solution

NEW CITY IS IN THE

CURRENT TIME ZONE

Destination in same
time zone as home.

No need to change time zones if desti-
nation is in same time zone as home.

INITIALIZING LENS

CANNOT FOCUS

Camera cannot focus.

Wait until message has cleared from
display and camera has zoomed all
the way out.

—

LENS ERROR

Lens error.

Turn camera oﬀ and then on again. If
error persists, contact retailer or Nikon
representative.

LENS COVER ERROR

Finger or other obstruc-
tion prevents lens cover
from opening.

Turn camera oﬀ and remove obstruc-
tion.

2, 14

COMMUNICATIONS ERROR

USB cable disconnected
during transfer or print-
ing.

If PictureProject displays error, click
OK to exit. Resume operation after
turning camera oﬀ and reconnecting
cable.

52–53,

USB option incorrect.

Choose correct USB option.

PictureProject did not
start.

See the PictureProject reference man-
ual (on CD) for more information.

—

NO IMAGES ARE MARKED

FOR TRANSFER

No pictures selected for
transfer.

Select pictures for transfer and try
again.

TRANSFER ERROR

Transfer error.

• Check battery level.
• Check that USB cable is connected.

52–53

SYSTEM ERROR

Error has occurred in
camera’s internal cir-
cuitry.

Turn camera oﬀ , remove and reinsert
batteries, and turn camera on. If error
persists, contact retailer or Nikon rep-
resentative.

PRINTER ERROR

CHECK PRINTER STATUS

Printer error.

Check printer. To resume, highlight
Resume (if available) and press
button.

—

In extremely rare instances, unusual characters may appear in the monitor and the cam-
era may stop functioning. In most cases, this phenomenon is caused by a strong external
static charge. Turn the camera oﬀ , remove and replace the batteries, and then turn the
camera on again. In the event of continued malfunction, contact your retailer or Nikon
representative. Note that disconnecting the power source as described above may result
in the loss of any data not recorded to internal memory or the memory card at the time
the problem occurred. Data already recorded will not be aﬀ ected.

Electronically Controlled Cameras