Kambrook KFH340 - Manual (Page 9)

9
NOTE: The Power-On Indicator
will only illuminate during the
ON cycle.
Turn the heater off by turning the Heat
Setting dial to the OFF position.
ThermoGuard Overheating
Safety Device
Your heater is fitted with a safety
device that switches off the heater
in the event of overheating. Should
this heater stop working, turn off the
heater and inspect the air inlet and
outlet for blockages. Wait at least five
minutes for the protection system to
reset before attempting to restart the
heater.
If the heater fails to operate or the
safety device switches off again,
return the heater to your nearest
Kambrook service centre for
examination or repair.
KFH340_IB_FA.indd 9 12/10/09 9:57 AM