Kodak EasyShare C360 - Manual (Page 46)

40 www.kodak.com/go/support
Troubleshooting
Computer/connectivity problems
Picture quality problems
Status Solution
Computer does not
communicate with
the camera
■ Insert a charged battery ( page 1 ).
■ Turn on the camera.
■ Make sure the proper USB cable is connected on camera and
computer port (
page 12 ). (If using an EasyShare dock, check all
cable connections. Make sure the camera is seated on the dock.)
■ Make sure the EasyShare software is installed ( page 11 ).
Pictures do not
transfer to computer ■ Click the Help button in the EasyShare software.
Slide Show does not
run on an external
video device ■ Adjust the camera Video Out setting (NTSC or PAL, page 27 ).
■ Make sure the external device settings are correct (see the device’s
user’s guide).
Status Solution
Picture is not clear ■ To automatically set exposure and focus, press the Shutter button
halfway. When the Ready light turns green, press the Shutter button
completely down to take the picture.
■ Clean the lens ( page 52 ).
■ Make sure camera is not in Close-up mode if you are more than 21
in. (0.7 m) from your subject.
■ Place the camera on a flat, steady surface or use a tripod, especially
in high-zoom settings or in low light.