Kodak EASYSHARE C603 - Manual (Page 47)

Troubleshooting
www.kodak.com/go/support 41
In Review mode, a
blue or black
screen is displayed
instead of a
picture. ■ Transfer the picture to the computer ( page 13 ), then format the card in
the camera ( page 29 ).
Caution: Formatting a card deletes all pictures and videos,
including protected files.
Shutter button
does not work. ■ Turn on the camera ( page 2 ).
■ Wait until the ready light stops blinking red before attempting to take
another picture.
■ Transfer pictures to the computer ( page 13 ), delete pictures from the
camera ( page 13 ), switch image storage locations ( page 27 ), or insert
a card with available memory ( page 3 ).
■ For best pictures, see page 4 .
Slide show does
not run on external
video device. ■ Adjust the camera Video Out setting (NTSC or PAL, page 27 ).
■ See the external device’s user’s guide.
Picture is too light. ■ Move so there is at least 24 in. (0.6 m) between camera and subject.
■ Decrease Exposure Compensation ( page 27 ).
Picture is not clear. ■ Clean the lens ( page 55 ).
■ Move so there is at least 24 in. (0.6 m) between the camera and the
subject.
■ Place the camera on a flat, steady surface or use a tripod.
Picture is too dark. ■ Turn on the flash ( page 8 ).
■ Move so there is no more than 7.9 ft (2.4 m) between the camera and
the subject.
■ Use Fill flash ( page 8 ) or change your position so light is not behind
the subject.
■ Increase Exposure Compensation ( page 27 ).
If... Try one or more the following