KRK KNS8400 - Manual (Page 15)

15
CUSHION REMOVAL/FITTING GUIDE
REPLACING THE HEAD CUSHION
The head cushion is held in place by a mounting flange which snaps
under small tabs located around the inside rim of the headband. If a head
cushion becomes loose, simply push the mounting flange of the earcup
cushion back into the earcup. Using your finger or thumb, press around
the edge of the mounting flange, making sure it “snaps” in place all the
way around the head cushion.
REPLACING THE EAR CUSHIONS
The ear cushions are held in place by a mounting flange which snaps
under small tabs located around the inside rim of the driver enclosure. If
an ear cushion becomes loose, simply push the mounting flange of the
ear cushion back into the driver enclosure. Using your finger or thumb,
press around the edge of the mounting flange, making sure it snaps in
place all the way around the ear cushion.