Kodak DVD-845 - Manual (Page 20)

CHANNEL DELAY:
CENTER 0CM
LS 170CM
RS 170CM
SUBWOOFER 0CM
3D PROCESSING
HDCD SETUP PAGE:
KARAOKE SETUP:
MIC ON
OFF
AUDIO SETUP
VIDEO SETUP PAGE:
SYSTEM SETUP
E5
CHANNEL DELAY PAGE
If you're not satisfied with the above REVERB
MODE, you can choose MANUAL. Please
refer to CHANNEL DELAY to setup.
CENTER, LS, RS, SUBWOOFER, 3D
PROCESSING DELAY SETUP
If you put DOLBY DIGITAL(AC-3) surround
sound speakers in a circle around, the sound
effect will be perfect. But normally it's hard to
do so. Then you can setup these items to
reach the original sound effect . Meantime,
you can setup distance by manual of each
audio channel. The reference setup is 0,
170cm, 170cm, 0
FILTER OFF
44.1K
88.2K
AUDIO SETUP
FILTER
This setup can change output sample rate
when playing HDCD disc.
Setup for 44.1KHz, the system can output all
signal of the disc sample rate between 0 to
44.1KHz
SHARPNESS HIGH
MEDIUM
LOW
BRIGHTNESS 0
CONTRAST 0
LUMA DELAY 0T
1T
SCART YCbCr
RGB OUTPUT
MAIN PAGE
SHARPNESS, BRIGHTNESS, CONTRAST,
LUMA DELAY
Please set up these three items to control the
video output terminal, such as TV set, display
screen etc, to reach a satisfied image. The
refence setup is "MEDIUM", O, O, OT.
the signal over 44.1KHz will be cut .
Setup for 88.2KHz, the system can output all
signal of the disc sample rate between 0 to
88.2KHz , the signal over 88.2KHz will be cut
Setup for off, the system will output all signal
without any limit.