Kodak EASYSHARE D1025 - Manual (Page 14)

9 www.kodak.com/go/support
Getting started
Attach a clip-style standard picture frame
CLIP-style
■ Use the clips that are attached to the standard picture frame.
■ Use the included self-stick foam spacers to fill any gap between the digital frame’s
back panel and the clips on the standard frame. Stack the spacers if necessary.
Avoid adding more spacers than necessary to prevent excessive force against the
clips.
If necessary:
■ Tighten the screws to secure the clips. Be careful not to over-tighten.
Foam spacers
Glass removed
D1025: Retract tabs first.
Purchased standard
picture frame