KITCHENAID 5K45SSC - Manual (Page 18)

English
18
Accessories
To Attach
1. Turn speed control to “O”.
2. Unplug Stand Mixer or disconnect
power.
3. Loosen accessory knob by turning it
counterclockwise. Remove accessory
hub cover.
4. Insert accessory shaft housing into
accessory hub, making certain that
accessory power shaft fits into square
accessory hub socket. It may be
necessary to rotate accessory back and
forth. When accessory is in proper
position, the pin on the accessory will
fit into the notch on the hub rim.
5. Tighten accessory knob by turning
clockwise until accessory is completely
secured to Stand Mixer.
6. Plug into proper electrical outlet.
General Information
KitchenAid ® Accessories are designed to assure long life. The accessory power shaft
and hub socket are of a square design, to eliminate any possibility of slipping during
the transmission of power to the accessory. The hub and shaft housing are tapered to
assure a snug fit, even after prolonged use and wear. KitchenAid
® Accessories require no
extra power unit to operate them; the power unit is built-in.
General Instructions
‡ Not part of
Stand Mixer.
Accessory
Hub Socket
Accessory
Knob
Notch Pin
Accessory Shaft
Housing
Accessory
Power Shaft‡
Accessory
Housing