Maintenance work on chassis and engine – KTM 990 SUPER DUKE User Manual
Page 70
Remove the drain plug
[6] on the oil tank and allow the oil to drain into a receptacle. Remove
the screws
[7] and tilt the oil return valve [8] to the side.
Carefully pull the oil screen
[9] out of the oil tank.
Thoroughly clean the drain plugs, the cover and both oil screens. Clean all rubber seal rings
and check for damage. Replace if necessary.
MAINTENANCE WORK ON CHASSIS AND ENGINE
»
69
8
7
7
6
9
This manual is related to the following products:
See also other documents in the category KTM Motorcycles:
- 125 SX (48 pages)
- EXC-F 400 XC-W (68 pages)
- 400 EXC RACING (66 pages)
- 530 XCR-W USA (125 pages)
- Supermoto 40LC4-E (46 pages)
- 380SX (153 pages)
- 1190 RC8 JP (234 pages)
- 640 LC4 (50 pages)
- 990 SUPER DUKE (90 pages)
- 50 SX PRO JUNIOR LC (35 pages)
- 125 SX (46 pages)
- EXC 200 EXC (70 pages)
- 690 ENDURO AUS/UK (179 pages)
- 400 (46 pages)
- XC 105 SX (42 pages)
- SUPERENDURO R 950 (40 pages)
- 990 ADVENTURE (102 pages)
- 200 (67 pages)
- 560 SMR 2006 (28 pages)
- 50 SX (42 pages)
- 85 SX (40 pages)
- 250 SX-F (70 pages)
- Super Duke 990s (52 pages)
- 525 SX (62 pages)
- 950 SUPERMOTO R (86 pages)
- 3CF6001G6EN (24 pages)
- 950 R (86 pages)
- Supermoto 640LC4 (46 pages)
- ENDURO 640 LC4 (60 pages)
- 85SX (42 pages)
- ENDURO SUPERMOTO 640 LC4 (60 pages)
- Supermoto 690 (165 pages)
- 950 SUPERMOTO (90 pages)
- 950 (86 pages)
- 300SX (56 pages)
- Supermoto 640 LC4 (40 pages)
- 3CF8403H0EN (28 pages)
- 50 SX JUNIOR (42 pages)
- 450 SMR (91 pages)
- 85/105 SX (42 pages)
- 3CF6001F5EN (20 pages)
- 300 XC 2008 (74 pages)
- XCF-W 250 EXC-F EN (63 pages)
- EXC 250 XC DE (69 pages)