Kut-Kwick RoadMaster RM80-88D - Manual (Page 3)

Features of the RoadMaster®: Model No. RM 80-88D/RM 80-187D
Cut: 88” or 187” with towed cutter option
Cutter Assembly: 1/4” thick steel cutter deck
Cutting Height: 4” to 8” height adjustment
Blades: Three (3) 3/8” hardened alloy steel blades
Engine: 80 HP Cummins, industrial, cast iron, overhead cam, water-cooled
diesel engine
Speed: 0 to 11 mph (low/mowing range)
0 to 24 mph (high/transport range)
Slope:
0° to 31° slopes, designed with low center of gravity for safety on
slopes
20° with optional Rear Towed Cutter attached
Steering: Steering wheel directs the two 6” x 16”, 6 ply wheels mounted on
the front of the cutter deck.
Tires: 38” x 18.00-20”, 8 ply rated tires; tractor tread tires for best
traction in rough or wet conditions
Seating: Tilting seat with restraining arms, to maintain level seating on
slopes
ROPS: Four point certified Roll Over Protection System (ROPS) and
retractable seat belt
Cab: Hard top canopy for sun protection
Oil Reservoir: 58 gallon hydraulic oil reservoir with oil/air separator, to prevent
foaming, overheating and water intrusion from condensation.
Diesel Fuel Tanks: 28 gallon; dual diesel fuel tanks on the front of the machine away
from the operator designed to fuel the engine on slopes
Options and Accessories:
• Rear Towed Cutter – Cutting width: Rotary – 15’ 7" (187").
• Hydraulic controls in the cab allow the operator to raise, lower and engage
the blades on each (left & right) deck independently. Towed cutter attaches or
detaches from tractor, without tools, in 1 1/2 minutes
• Enclosed Hard-Panel Cab – With air conditioner and/or heater
The RoadMaster® design is patented.