Aac-3, Aac-2, And cellsmart – Kentrox AAC-2TM User Manual
Page 9: Select physical layer modules (continued)
9
AAC-3
®
, AAC-2
™
and CellSMART
®
Ordering Information
Description
Catalog Number
Chassis and Power Supplies
AAC-3 Eight Slot Chassis
10000
AAC-3 DC Power Supply
10101
AAC-3 AC 120 Volt Power Supply
10100
AAC-3 AC 240 Volt Power Supply
10102
AAC-3 AC 120/240 Volt Power Supply
10103
AAC-2 Four Slot Chassis
10001
AAC-2 DC Power Supply
10111
AAC-2 AC 120 Volt Power Supply
10110
AAC-2 AC 240 Volt Power Supply
10112
AAC-2 AC 120/240 Volt Power Supply
10113
Common Modules
AAC Alarm Module
10011
AAC Service Data Module (SDM)
10013
AAC Integrated System Controller with 3.2.0 software
10022-320
Protocol Modules
AAC Cell Protocol Module
10200
AAC Packet Protocol Module
10201
AAC Quad Cell Protocol Module
10202
AAC Quad Packet / CBR Protocol Module
10203
AAC Enhanced Shaping Cell Protocol Module
10204
AAC Quad Packet Protocol Module
10205
AAC Quad Ethernet Protocol Module
10206
AAC Octal CES/CBR Protocol Module
10207
Select Physical Layer Modules (continued)
DS3 AND E3 PHYSICAL LAYER MODULES
Interface connector: 75 ohm coaxial BNC
Line rate: DS3 - 44.736 Mbps
E3 - 34.386 Mbps
OC-3C/STM1 SINGLE AND MULTI-MODE PHYSICAL LAYER MODULES
Interface connector: Duplex SC
Line speed: 155.52 Mbps
Wavelength: 1310 nm (single-mode or multi-mode)
QUAD ETHERNET PHYSICAL LAYER MODULE
Data rates: 10 Mbps (per port) half duplex
Number of ports: 4
Interface connectors: RJ4