Kenwood LZ-651W - Manual (Page 5)

English 5
Setup
1 Press button.
2 Select "SETUP", and press button.
3 Press or button to select the adjusting item.
"NAV": Setup input and switch method of the navigation
picture.
Item Setting
"RGB"* When Kenwood navigation system is connected
by the dedicated cable.
"AV-IN" When connected to AV-IN terminal be composite
signal cable.
"OFF" It doesn’t switch the navigation picture.
*Default setting
If you set to "OFF" while the audio source is set to "NAV",
the audio source would switch to "NORMAL".
"AV-IN": Setup switch method of the picture input to AV-
IN terminal.
Item Setting
"VD"* Switched by the operation of the video source.
"CAM" Switched automatically when video signal is
input to AV-IN terminal.
"OFF" It doesn’t switch the picture input to AV-IN
terminal.
*Default setting
You cannot set "AV-IN" when "NAV" is set to "AV-IN".
If you set to "OFF" while the audio source is set to "AV-IN",
the audio source would switch to "NORMAL".
"BEEP": Setup the beep sound ON/OFF.
Item Setting
"ON" Beep is heard.
"OFF"* Beep is canceled.
*Default setting
4 Press or button to select each item.
5 Select "RETURN" and press to end the Menu
mode.
Also, the monitor exits from Menu mode by no opeation
for 10 seconds.
VOICE
ENTER
VOICE
ENTER
MENU
MENU
LZ-651W_ENG r2 03.7.25 9:50 AM Page 5