Kobe Range Hoods RA9236S - Manual (Page 13)

11
To Replace Light Bulb
CAUTION: HALOGEN LIGHT UNIT MAY BE HOT! WAIT UNTIL UNIT IS COOL.
1) Make sure all control switches are off, and range hood is unplugged.
2) Use a flat head screwdriver to pop out the protective covering as shown in Figure 15.
3) Gently pull out the defective light bulb and discard. Light bulbs should be 12V 20W
maximum. Refer to Figure 16. Push bulb securely into light socket.
4) Replace protective cover.
5) Plug in range hood.
Figure 15 Figure 16