Konica Minolta MAXXUM 50 - Manual (Page 61)

61
• If you have questions about your camera, contact your local
camera dealer or write to the Konica Minolta distributor in your
area.
• Before shipping your camera for repair, please contact an
authorized Konica Minolta service facility for instructions.
QUESTIONS AND SERVICE
• If the camera or lens barrel is dirty, wipe it gently with a soft, clean,
dry cloth. If the camera or lens comes in contact with sand, gently
blow away loose particles - wiping may scratch the surface.
• To clean the lens surface, first brush away any dust or sand then
gently wipe the lens with a cloth or tissue designed for optics. Use
lens cleaning fluid if necessary.
• Never place lens fluid directly on the lens.
• Never touch the interior of the camera, especially the shutter and
mirror, doing so may impair their alignment and movement.
• Dust on the mirror will not affect the exposure but may affect the
focus. Use a blower brush to remove dust from or around the
mirror.
• Never use compressed air to clean the camera’s interior; it may
damage sensitive internal components.
• Never use organic solvents to clean the camera.
• Never touch the lens surface with your fingers.
CLEANING
• Check the camera’s operation carefully, or take test photographs
before an event or journey.
• Konica Minolta is not responsible for any loss that may occur due
to an equipment malfunction.
BEFORE IMPORTANT EVENTS