beautypg.com

Assembly instructions, Important precautions, Step 4 – Karcher K 360 M User Manual

Page 4: Step 3, Step 1, Water supply (cold water only), Step 2

background image

You will need a standard screw driver OR a Torx T-25 screw driver

Step 4

Slide the spray wand exten-

sion into the gun. Turn the wand collar
clockwise onto the gun threads until
tight.

3

ASSEMBLY INSTRUCTIONS

Step 3

Slide the hose caddy into the handle

slots and snap into place.

Step 1

Slide each of the mobile adapter brack-

ets to the pressure washer. Align the pegs and
holes on the brackets. Insert the 4 screws and
tighten as shown.

Water Supply
(Cold Water Only)

• Water hose must be at least 3/4 inch

in diameter.

• Flow rate of water supply must not fall

below 2.5 GPM (gallons per minute).

• Flow rate can be determined by running

the water for one minute into an empty
5-gallon container.

IMPORTANT PRECAUTIONS –

continued

• The water supply temperature must not

exceed 104°F/40°C.

• Never use the pressure washer to draw

in water contaminated with solvents,
e.g. paint thinners, gasoline, oil, etc.

• Always prevent debris from being drawn

into the unit by using a clean water
source.

Step 2

Slide the handle onto the

mobile adapter brackets as shown,
insert screws and tighten.