Kicker HS12L5 User Manual
Sinstallation instructions, Specifications
Congratulations! You have just purchased one of the most advanced
subwoofers in the history of car audio. Your KICKER Solo-Baric is the latest
in KICKER s trend-setting Solo-Baric line, designed and engineered to
deliver the ultimate in low bass performance and unmatched durability.
Thanks for buying KICKER
. Enjoy.
S
Installation Instructions
These enclosures combine KICKER’s award-winning Solo-Baric subwoofers
with computer designed and human-fine-tuned enclosures. They offer a
level of bass performance never before thought possible from a commer-
cially available enclosure. The HS Series enclosures are covered in a Caataalyzed
Polyurethaane for protection and pre-loaded with either a Solo-Baric SL5 or
SL7 woofer.
KICKER HS enclosures are engineered to provide the best bass response
when mounted in the rear hatch or trunk.
M
Model
Woofer
Imp.
Power
Top Bottom Height Width
Handling Depth Depth
(Watts) (In., cm) (In., cm) (In., cm) (In., cm)
H
HSS1122LL55
S12L5
*2,4 600 77-11/16,19.53 1144, 35.56 1144-5/8, 37.15 1166, 40.64
H
HSS1122LL77
S12L7 *2,4 750 77-11/16,19.53 1144, 35.56 1144-5/8, 37.15 1166, 40.64
NOTE:
*The two ohm unit should be used with the KX Series Class D amplifiers KX550.3, KX700.5, KX400.1,
and KX600.1. It is not recommended for use with any KX two or four channel amplifiers.
The four ohm unit should be used with any KX Series two or four channel amplifier. It is not rec-
ommended for use with any KX Series Class D amplifiers.
HS12L5 / HS12L7
Sealed Enclosure Systems
REAR HATCH
or TRUNK
Move enclosure around and mount it
where it sounds best to you.
FRONT
Specifications