Track / disc repeat, Track scan, Disc scan – Kenwood 715S User Manual
Page 25
— 25 —
Successively play the beginning of each disc on a changer
until you find the one that you want to listen to.
Starting the disc scan:
Press the D.SCN button. "D-Scan ON" is displayed and the first
10 seconds of each disc will be played, in the order they are
loaded on the changer.
The disc number currently being heard blinks in the display.
Stopping to Listen to the Disc Being Scanned:
Press the
38 or D.SCN button again to stop the scan and keep
on listening to the disc normally.
• The disc scan function is canceled when you eject the disc.
• The disc scan function only scans each disc on the changer
once.
• "LOAD" is displayed when discs are being exchanged on the
disc changer.
NOTE
Disc Scan
(
Function of disc changers)
Starting the Track Scan :
Press the SCAN button. "T-Scan/Scan ON" is displayed and the
first 10 seconds of each track will be played, in order.
The track number currently being heard blinks in the display.
Stopping to Listen to the Track Being Scanned:
Press the
38 or SCAN button again to stop the scan and keep
on listening to a track normally.
• The track scan function is canceled when you eject the disc.
• The track scan function only scans each track on a disc once.
NOTE
Successively play the beginning of each track on a disc until
you find the track that you want to listen to.
Track Scan
Repeat playing the track or the disc currently being listened to.
Turning Repeat Play On/Off:
Press the REP button to switch repeat track/disc play on and
off as follows:
"T-Repeat/Repeat ON" is displayed and the track number blinks
in the display when track repeat is on.
"D-Repeat ON" is displayed and the disc number blinks in the
display when disc repeat is on.
Repeat play is canceled when you eject the disc.
NOTE
▼
Track Repeat ON
▼
Disc Repeat ON (Function of disc changers)
▼
Track/Disc Repeat OFF
Track / Disc Repeat
• Input "0" to select disc 10.
• If you input more than two numbers all at once, a search will be
made only of the last number input.
Press either the DISC
+
or DISC
–
button while the number
inputted is blinking.
The disc starts playing.
Canceling Direct Disc Search While It Is Operating:
Press the
38 button.
2
NOTE
KDC-X715_U.S_r9 00.12.26 3:47 PM Page 25