Smeg Arco Isola Plus KSEIV96X - Manual (Page 10)

20 GB
MAINTENANCE
Grease filters
CLEANING METAL SELF-SUPPORTING GREASE FILTERS
Alarm signal reset
• Switch off the lights and extractor motor.
• Press button V3 for at least 3 seconds, until the
leds start to flash.
Cleaning the filters
• The filters are washable and must be cleaned
when led S1 flashes or at least every 2 months
of operation, or more frequently for particularly
heavy usage.
• Remove the filters one at a time by pushing
them towards the back of the group and
pulling down at the same time.
• Wash the filters, taking care not to bend them.
Allow them to dry before refitting.
• When refitting the filters, make sure that the
handle is visible on the outside.