Care and cleaning – Safety 1st 49529 User Manual

Page 9

To Change the Measurement Scale:

NOTE:

The Accu-Touch Forehead Thermometer can display temperature

measurements in either Fahrenheit or Celsius. The unit will be factory preset
to Fahrenheit. Use this procedure to change to Celsius or back to Fahrenheit
at any time.

To switch the display between °F
and °C and vice-versa: While off,
press and hold the MODE button.
Continue holding while you press
and release the ON/OFF button

(Figure 1)

Care and Cleaning

• Wipe the probe with an alcohol swab or cotton swab moistened with

70% isopropyl alcohol before & after each use.

• After cleaning, wait at least two minutes for the unit to adjust to room

temperature before taking measurement.

• Use only a soft, dry cloth to clean the body of the thermometer (if

necessary).

• Never use an abrasive cleanser or submerge the thermometer in water

or other liquids.

• Do not expose the thermometer to extreme temperatures, humidity,

direct sunlight or shock. Store at room temperature.

Fahrenheit

Celsius