Standard Horizon CPV350 - Manual (Page 108)

Page 108 CPV350
Figure 19.7.0 - POS REQUEST REPLY menu
The CPV350 has the capability to turn off the Position Request ringer.
1. Press [MENU] two times. Move the ShuttlePoint knob to highlight RADIO SETUP and
press [ENT] or move the ShuttlePoint knob to the right.
2. Move the ShuttlePoint knob to highlight DSC SETTINGS and press [ENT] or move the
ShuttlePoint knob to the right.
3. Move the ShuttlePoint knob to highlight RINGER OUTPUT and press [ENT] or move
the ShuttlePoint knob to the right.
4. Move the ShuttlePoint knob to select POLLING and press [ENT] or move the
ShuttlePoint knob to the right.
5. A popup window will be shown with On or Off, move the ShuttlePoint knob to select Off
and press [ENT] or move the ShuttlePoint knob to the right.
6. Press [CLR] until the menu disappears or an easier method is to move the ShuttlePoint
knob to the left a few times.
If you wish to return to enabling the ringer tone, just repeat the above procedure, moving
the ShuttlePoint knob to select On in step “5” above.
Figure 19.7.0 - RINGER OUTPUT menu
19.7.1 Transmitting a Position Request to Another Vessel
Using the Individual directory to make a Position request
1. Press the [CALL] key. The “DSC Operation” menu soft keys will appear below the
display.