Stamina Products 35-1650F - Manual (Page 10)

ALWAYS USE TWO OR MORE STRONG PEOPLE TO UNFOLD OR FOLD THE INMOTION
TRAMPOLINE. FAILURE TO USE TWO OR MORE STRONG PEOPLE MAY ALLOW THE
RAILS TO SPRING BACK INTO THE FOLDED POSITION AND STRIKE SOMEONE WHICH
CAN CAUSE SERIOUS BODILY INJURY OR DEATH.
Remove the safety pad before folding the trampoline for storage. Failure to remove the
pad will result in damage to the pad.
The INMOTION trampoline can be folded as illustrated for easy storage. Please follow the following process:
STORAGE INSTRUCTIONS
STEP 3: To prevent the trampoline from snapping into the folded position, push down the four RAILS(1,2,3,4).
Then unhook the Wire Ring from the SECURE PIN(10) and turn the pin to a flat position to remove the pin.
Firmly grasp both sides of the trampoline and fold the trampoline upward, the trampoline will fold upward at
the BRACKET GUIDES as shown in illustration Step 3.
STEP 1: Unscrew the LEGS(7) from the trampoline. Refer to
illustration Step 1.
STEP 2: Remove the SAFETY PAD(6) from the frame. After the
SAFETY PAD(6) is removed, place the trampoline on the floor
with the threaded connectors pointing up. Refer to illustration Step 2.
10
STOP! ALWAYS USE TWO OR MORE STRONG PEOPLE TO UNFOLD
OR FOLD THE INMOTION TRAMPOLINE. FAILURE TO USE TWO OR MORE
STRONG PEOPLE MAY ALLOW THE RAILS TO SPRING BACK INTO THE
FOLDED POSITION AND STRIKE SOMEONE WHICH CAN CAUSE SERIOUS
BODILY INJURY OR DEATH.
WARNING: !
Threaded
Connector
Bracket Guide
The safety pad must
be removed before
folding the trampoline.
Wire Ring
Step 2 Step 3
Step 1
STEP 5: Refer to illustration Step 5. Set the position of the SECURE PIN(10) as shown. Lift up the RAILS
(1, 2), insert the SECURE PIN(10) into the RAIL(1), and hook the Wire Ring onto the pin from the bottom of
the RAIL(1).
STEP 6: Fold the trampoline again as shown in illustration Step 6.
Wire Ring
Step 5 Step 6