Skyworks LCD-26L16 - Manual (Page 13)

»щ±¾²ЩЧч »щ±¾²ЩЧч
- 10 -
In the Function Menu, OSD languages and APS
related options are displayed on the screen.
Menu Language
The Language is English and Chinese.
Manual Tuning
Fine Tune
Press VOL.+ / VOL.- button to adjust the
little change of frequency.
1. Press Menu button.
2. Press Vol+ or - button repeatedly until the TUNER
icon is highlighted.
3. Press the PROG- button and highlight Program and
change the Channel number showing to the number
that you wish to store or change the TV station showing
by pressing Vol+/- button.
4. Press Prog - button repeatedly and highlight
MANUAL TUNE.
5. Start the manual tuning process by pressing the
VOL+ or VOL- button.
6. When the desired TV station is showing press the
MENU button to return the TV to its normal operation.
The TV station will be automatically stored into the
channel number that was previously inputted.
7. To store further channel repeat above steps but this
time change the channel number in step 3 to your next
desired stored channel number 2,3, etc.
" " " "
Function menu
Sound System
Press the button to select a new sound standard
value in TV.
The options are DK,I,M.
AUTO Tune
Notice: Only after finishing auto tune, channels
will be sorted. If you break the process during the auto
tune period, channels will be searched and stored,
however,
NOTE: This TV factory set to "I" UK sound. If changed to
another setting whilst receiving a UK TV station this will
result in loss of sound. Change back to "I" to restore the
sound.
1. Press MENU button.
2. Press VOL+/- button and highlight the TUNING
icon.
3. Press PROG - button and highlight AUTO TUNE.
4. Press VOL+ button to start the automatic tuning
process.
5. After a few minutes the tuning will end and the
first station stored will show on the TV screen.
6. Change channels by pressing the
PROG+/PROG-
buttons.
the channel will not be sorted into their
correct channel order.
The last Menu is PIP menu,you can select Mode,
PIP H-POS,PIP V-POS,Brightness,Contrast,Sub
Source and Swap items by pressing PRGO+/-
Buttons.
Mode
The choices are PIP and Off. Only bychoosing PIP,
you can enter PIP H-POS,PIP V-POS,Brightness,
Contrast,Sub Source and Swap items.
PIP H-POS
Press the button to change horizontal position.
PIP V-POS
Press the button to change vertical positon.
Note PIP (Picture In Picture) is used to display an
external source such as HDMI/VGA/YPbPr box at
same time as displaying the TV channel that you
are watching.
PIP menu
SKIP
press the skip to enable or disable the current
program being tuned by pressing Vol+ or Vol-
buttons the choice are on and off .
" " " "
Press Vol+ to enter.
User can set the two channel numbers that want
to swap in program 1 and program 2 ,select the
swap item, press Vol+ button to perform swapping. " "
Prog. Sort
Country (Option)
Select your location country: UK / Greece / Hungary/
Italy / Norway / Netherlands / portugal / Poland /
Sweden / Slovenia / Slovakia / Turkey / Austria /
Belgium / Switzerland / Czech / Germany / Denmark/
Spain / France / Finland.
Notice: Different countries will effect the sort process
in AUTO TUNE.
Factory Reset (Option)
Press VOL+ key to delete all
program information. " " previously stored
Txt Language(Option)
The teletext language is UK,East Euro,Greece,Cyrillic,
Arabic.