Shindaiwa AHS242ef - Manual (Page 14)

14
Safe Operation
This machine is designed especially for
trimming hedges.
Never use this machine for any other
purposes. Never try to cut stones, met-
als, plastics or any other hard objects.
Using this Articulated Hedgetrimmer for
other purposes than trimming hedges
may damage the machine or cause
serious injury.
Before trimming:
Wear suitable protective clothing
■
and equipment. See the “Safety”
section for information.
Choose the best working position
■
for safety against the falling objects
(branches, etc.).
Start the engine.
■
Rest when you feel fatigued.
■
Never stand directly underneath the
■
branch you are cutting. Be aware of
falling branches. Note that a branch
may spring back at you after it hits
the ground.
NOTE:
Rest when you feel fatigued.
Working Position
Hold the shaft grip above the pow-
■
erhead with your right hand, and
the loop handle with your left hand.
Your left arm should be extended
■
to the most comfortable position.
Operator in working position
Right hand
on shaft grip
Hold the loop handle
with your left hand
WARNING!
Before performing any mainte-
nance, repair, or cleaning work on the
unit, make sure the engine and cutting
attachment are completely stopped.
Disconnect the spark plug wire before
performing service or maintenance.
WARNING!
Non-standard accessories, cut-
ting attachment, or replacement parts
may not operate properly with your unit
and may cause damage and lead to per-
sonal injury.
IMPORTANT!
MAINTENANCE, REPLACEMENT OR REPAIR OF EMISSION CONTROL DEVICES AND SYSTEMS MAY BE PERFORMED
BY ANY REPAIR ESTABLISHMENT OR INDIVIDUAL; HOWEVER, WARRANTY REPAIRS MUST BE PERFORMED BY A
DEALER OR SERVICE CENTER AUTHORIZED BY ECHO, INC. THE USE OF PARTS THAT ARE NOT EQUIVALENT IN
PERFORMANCE AND DURABILITY TO AUTHORIZED PARTS MAY IMPAIR THE EFFECTIVENESS OF THE EMISSION
CONTROL SYSTEM AND MAY HAVE A BEARING ON THE OUTCOME OF A WARRANTY CLAIM.
General maintenance
NOTE:
Using non-standard replacement parts could invalidate your Shindaiwa warranty.