Sentry Industries WIRELESS 2.1 SP900 - Manual (Page 3)

What’s Included: Powering the Speaker:
W
ired Listening:
Listening W
irelessly:
Powering the T
ransmitter:
1) W
ireless Speaker
2) T
ransmitter 3) Cradle Adapters 4) 3.5mm Stereo to R
CA Cable
5) 3.5mm Stereo Cable 6) AC/DC Adapters The speaker uses 4 x A
A batteries or the included 120V
-DC5V 1OOOmA AC Adaptor .
1) Open the batter
y compar
tment on the bottom of your speaker
.
2) Inser
t four AA batteries in the direction shown.
3) R
eplace the batter
y compar
tment cover
.
You may connect any audio device such as an MP3, CD, DVD Player
, Cable Box or TV
.
1)
Locate the “
AUDIO
-OUT” jack on your selected audio device.
2)
Connect the device to the “
AUDIO
-IN” jack on the side of the speaker using the supplied cables.
3)
Make sure the volume of the source device is set to 50% maximum.
4) T
urn
on the speaker & adjust the volume to a suitable level.
You may connect any audio device such as an MP3, CD, DVD Player
, Cable Box or TV
.
1)
Locate the “
AUDIO
-OUT” jack on your selected audio device.
2)
Connect the device to the “
AUDIO
-IN” jack on the transmitter
.
3)
Make sure the volume of the source device is set to 50% maximum.
4) T
urn
on the transmiter & the speaker and adjust the volume to a suitable level.
The transmitter uses 6 x A
AA
batteries or the included 120V
-DC12V 500mA AC Adaptor .
1) Open the batter
y compar
tment on the bottom of transmitter
.
2) Inser
t six AAA batter
y in the direction shown.
3) R
eplace the batter
y compar
tment cover
.
4)
Or attach the AC/DC adaptor labeled “SPEAKER"
to
the DC 5V jack at right side of speaker
.
5) P
ress the power button "ON" at the top of speaker
.
4) Or attach the AC/DC adaptor labeled “TR
ANSMIT
TER
” to "DC12V" jack at right side of transmitter
.
5) P
ress the power button "ON" at the front of the transmitter
.
NOTE:
Please refer to the QUICK
-ST
ART GUIDE included with this pr
oduct for detailed
instr
uctions on connecting the T
ransmitter to most commonly used audio devices.