Shindaiwa AH2510 - Manual (Page 5)

IN ! G!
r this machine alter
onents! ompon
5
Product D Descriptio
Using ng the illustration
guid de, familiarize yo
with h the Shindaiwa
arti ticulated hedge
me mer and its variou
ne
nents. Understan
m
machine helps e
p
performance, lo
life, and safer o
starte
Gearcase
Hedge Trimmer
Cutter Bar and
Cutter Blades
Latch
Release
Latch Lock
Spark
Ignition Throttle
interlock
Throttle Trigge
6SHFLÀFDWLRQV
* The EPA emission compliance referred to on the emission compliance label located on the engine, indicates the number of operat- tt
ing hours for which the engine has been shown to meet Federal emission requirements. Category C = 50 hours (Moderate), B = 125
hours (Intermediate) and A = 300 hours (Extended).
** The NGK CMR5H also meets the requirements for electro magnetic compliance (EMC).
Specifications are subject to change without notice.
Model AH2510
Engine Type 4-cycle, vertical cylinder, air cooled
Engine Bore x Stroke 34 x 27 mm/1.34 x 1.06 in.
Engine Displacement 24.5cc/1.5 cu. in.
Unit Weight, Less Fuel 6.3 kg/14 lbs.
Unit Dimensions (LxWxH) 2360 x 225 x 235 mm / 92.9 x 8.9 x 9.3 in.
Max. Power 0.8 KW / 1.1 hp @ 7,500 min -1 (rpm)
Recommended mmended idle speed 3,000 (±250) min -1
Fuel Tank Capacity 590 ml/20.3 oz..
Fuel/oil ratio Oil 50:1 with *ISO-L-EGD or JASO FC class 2-cycle Mixing O
Carburetor Walbro WYL, Diaphragm type
Ignition Fu Fully electronic, program controlled
Spark Plug** NGK C NGK CMR5H
Electrode Gap 0.6 - 0.7 mm/ .024 -.028 in. 28 in
Torque 100-150 kg cm / 9.8 - 14.7 N∙m
Air Cleaner Foam pre-filter; sealed felt main filter
Starting Method Recoil type
Stopping Method Slide switch, grounding type
Blade Length 567 mm/22.3 in
Clutch Type Automatic, centrifugal clutch with bevel gear
Gear Type Spur gears
Gear Lubrication Lithium-based grease
Standard Equipment Tool kit w/ spark plug wrench, 4 mm hex wrench, 8 x 10 mm spanner, blade scabbard.
EPA Emission Compliance Period* Category A