beautypg.com

Spin Master Crash Force Regenerator User Manual

Spin Master For motorcycles

background image

3

2

3

4

2

1

CRASH FORCE™

REGENERATOR SUV™

After

Impact!

BATTERY INSTALLATION

INSTALLING BATTERIES IN THE REGENERATOR™

Crash Force™ Regenerator™ is designed to work with standard RC 6-Volt NiCad batteries and charger,
sold separately. If you do not have a 6-Volt battery and charger, Crash Force™ Regenerator™ can operate with
Five-AA batteries. • Controller is designed to work with a 9-Volt battery, sold separately.

6 VOLT

1 - To install the

6-Volt battery, rotate

the door locks to the

sides of the battery

compartment door

as shown.

2 - Remove the battery

compartment door.

3 - Place the battery

in the battery

compartment, making

sure to follow the

correct + and –

polarity markings.

Then fold the internal

battery adjuster out,

to hold the 6-Volt

battery in tight.

4 - Replace the battery

compartment door and

rotate the door locks

to their “Lock” positions.

AA BATTERIES

1 - To install the AA

batteries, rotate the

door locks to the sides

of the door as shown.

2 - Remove the battery

compartment door

and make sure the

internal battery

adjuster is folded in,

out of the way.

3 - Place the batteries

in the battery tray

according to the + and

– polarity markings.

4 - Place the battery

tray into the battery

compartment.

5 - Replace the battery

compartment door and

rotate the door locks

to their “Lock” positions.

Turn

Vehicle

Over

Lock

Lock

Battery

Compartment

Door

1

Turn

Vehicle

Over

Lock

Lock

Battery

Compartment

Door

Battery

Compartment

Door

Battery

Compartment

Door

Five-AA

Batteries

Battery

Tray

Battery

Compartment

Door

Battery

Compartment

Battery

Compartment

6-V

Battery

Battery

Compartment

3

2

1

9-V

Battery

Phillips Screw

INSTALLING CONTROLLER

9 VOLT BATTERY

1 - Using a Phillips screwdriver, undo the

hold down screw and remove the battery

compartment door.

2 - Place the 9-Volt battery in the battery

compartment, making sure to follow the

correct + and – polarity markings.

3 - Replace the battery compartment door

and refasten the hold down screw.

IMPORTANT! PROBLEMS?

Before taking Crash Force™ Regenerator™ RC

back to the retailer, call our friendly

RC technicians at: 1-800-622-8339

STORAGE: The Crash Force™ Regenerator™

RC should be stored indoors in the box and

foam tray after each use.