Sunbeam MM8400 - Manual (Page 8)

6
Using your Sunbeam Café Moka
1. Place your caffé maker on a flat, level
surface.
2. Unscrew the upper caffé chamber from
the base, by holding the base with
one hand and turning the upper caffé
chamber anticlockwise with the other, see
figure 1.
3. Remove the stainless steel filter, and
fill the base with fresh, cold water, see
figure 2. Clear instructions indicating the
correct quantity of water required for a
standard coffee are shown in the Moka
Coffee Guide on page 9.
Note: Do not fill water above level of pressure
release valve.
Note: Do not operate the Sunbeam Café Moka
without water in the base and ensure the
water is cold. Do not use hot water for faster
operation.
4. Insert the stainless steel filter into the
base, see figure 3.
Figure 1
Figure 2
Figure 3
Pressure release valve
(Do not fill water
above this level).