Smeg Tumble Dyer AS 61 E - Manual (Page 10)

10 - EN
program.
To cancel any selected program;
•
Press “Start/Pause/Cancel” button for about
a duration of 3 seconds. The “Filter cleaning”
and “Water tank” warning LEDs as well as the
“0” warning LED on the program follow-up
indicator will light up at the end of this period
for reminding purposes.
A
As the inside of the machine will be
excessively hot when you cancel the program
while the machine is running, activate the
ventilation program to cool it down.
End of program
The “Filter cleaning” and “Water tank” warning
LEDs as well as the “0” warning LED on the
program follow-up indicator will light up at the
end of the program. The door can be opened
and the machine becomes ready for a second
cycle.
Press the “On/Off” button to shut down the
machine.
C
A 2-hour anti creasing program
to prevent laundry from creasing will be
activated if you do not take the laundry out
after the program has come to an end.
C
Clean the filter after each drying (please
see, Filter cleaning).
C
Drain the water tank after each drying
(please see, Water tank)
This appliance’s packaging material is recyclable. Help recycle it and protect the environment
by dropping it off in the municipal receptacles provided for this purpose. Your appliance also
contains a great amount of recyclable material. It is marked with this label to indicate the
used appliances that should not be mixed with other waste. This way, the appliance recycling
organised by your manufacturer will be done under the best possible conditions, in compliance
with European Directive 2002/96/EC on Waste Electrical and Electronic Equipment. Contact
your town hall or your retailer for the used appliance collection points closest to your home. We
thank you doing your part to protect the environment.
Models Vented Dryer with time control
Height / Height for built-under installation (cm) 85.0 / 82.0
Width (cm) 59.5
Depth / Depth for built-under installation (cm) 54
Height adjustment of feet (cm) 0.5
Weight, unpacked (kg) 29
Voltage 230V ~ 50 Hz
Connected load 2200 W
Fuse protection 16A
Technical Specifications