Silicon Laboratories C8051F04X-DK - Manual (Page 14)

C8051F04x-DK
14 Rev. 0.6
D
OCUMENT
C
HANGE
L
IST
Revision 0.4 to Revision 0.5
„ Section 1, added USB Debug Adapter and USB Cable.
„ Section 2, changed name from "Hardware Setup" to "Hardware Setup using an EC2 Serial Adapter".
„ Section 2, added 2 Notes bullets.
„ Section 2, removed Note from bottom of page.
„ Added Section 3, "Hardware Setup using a USB Debug Adapter".
„ Section 5.4.2, changed step 2 to include new instructions.
„ Section 7, J4, changed "Serial Adapter" to "Debug Adapter".
„ Target Board DEBUG Interface Section, added USB Debug Adapter.
„ DEBUG Connector Pin Descriptions Table, changed pin 4 to C2D.
„ Changed "jumper" to "header".
„ EC2 Serial Adapter section, added EC2 to the section title, table title and figure title.
„ EC2 Serial Adapter section, changed "JTAG" to "DEBUG".
„ Added "USB Debug Adapter" section.
„ Added J8 and J10 to the connector list.
Revision 0.5 to Revision 0.6
„ Removed EC2 Serial Adapter from Kit Contents.
„ Removed Section 2. Hardware Setup using an EC2 Serial Adapter. See RS232 Serial Adapter (EC2) User's
Guide.
„ Removed Section 8. EC2 Serial Adapter. See RS232 Serial Adapter (EC2) User's Guide.
„ Removed Section 9. USB Debug Adapter. See USB Debug Adapter User's Guide.