Sony SPP-A946 - Manual (Page 46)

46 US Answering Machine Features
Picking up new messages
1
Call your telephone number from a touch-tone phone.
2
When you hear the greeting, press (#) and enter your remote ID code
(security code).
You will hear a confirmation beep.
The number of new messages will be announced.
3
Press the keys in the “Table of control codes” below for the desired
operation command.
4
When you finish, disconnect the line.
Notes
• Do not let two seconds elapse between each digit of the remote ID code (security code) and
the control code.
• If you did not turn on the answering machine, your phone answers automatically after 10
rings.
• If you enter wrong remote ID code (security code) three times, the line will disconnect.
• If no keys are pressed within 20 seconds, the line will disconnect.
Tip
Cut off the Remote Control Card and carry it with you to see how to operate from an outside
phone.
Operating from an outside phone (continued)
Table of control codes
To Key
Play back messages in MAILBOX1 (#)(1)
Play back messages in MAILBOX2 (#)(2)
Play back messages in MAILBOX3 (#)(3)
Repeat backward (#)(4)
Skip forward (#)(6)
Erase individual message (#)(9)
Erase all the messages in MAILBOX1 (#)(9)(#)(1)
Erase all the messages in MAILBOX2 (#)(9)(#)(2)
Erase all the messages in MAILBOX3 (#)(9)(#)(3)
Record greeting (*)(7)
Turn answering machine on (*)(0)
Turn answering machine off (#)(0)
Stop operation (*)(*)
Notes
Plays back from the first new message.
Plays back from the first new message.
Plays back from the first new message.
Press during play back to repeat a
message.
Press during play back to skip forward.
Press during play back.
“Now recording” is announced.
Turns the system on. “Answering
function is on” is announced.
Turns the system off. “Answering
function is off” is announced.
Stops every function.