Installation cont’d – SVAT Electronics UC1301 User Manual

Page 5

INSTALLATION Cont’d...

RECEIVER

1. Insert the AV Adapter Plug into the AV Output port of the receiver

2. Insert the yellow and white cable plugs into the Video Input and

Audio Input Jacks of your TV.

3. Connect the AC Power Adapter to the 9V Power Input Jack

of the receiver.

4. Select the desire channel (1-4). Make sure it matches the transmission

channel of the Teddy Cam.

5. Plug the AC Power Adaptor into a standard 120V/230V AC electrical

outlet.

6. Slide the ON/OFF Switch to the ON position.

7. Television Set configuration:

•Turn on the power to the television set.

•Switch the TV channel to the VIDEO/LINE INPUT position.

•Adjust the TV volume and pictures, as desired.

•TV/Video can be switched each other to monitor surroundings

while TV / DVD program is being played.

8. Unplug the AC Power Adaptor from the electrical outlet when it is not

in use or is left unattended.

VIDEO RECORDING SETUP

1. Follow the normal setup procedures for the Bear Video Camera and

Receiver.

2. Insert the yellow & white cable plugs into the Video Input and Audio

Input Jacks of your VCR/DVR.

3. Make sure your VCR is connected to your television set.

www.svat.com

Bear Video Camera

3.5 Plug

AV Cable

Receiver

Audio Video

Input Input

White Plug

Yellow Plug