Sanyo MDF-C8V - Manual (Page 2)

SANYO E&E America Company
1062 Thorndale Avenue, Bensenville,
IL 60106 USA
Toll Free USA 800-858-8442 • Fax
630-238-0074
www.sanyobiomedical.com
SANYO Canada, Inc.
1- 300 Applewood Crescent,
Concord, Ontario L4K 5C7
905-760-4025 • Fax 905-760-9945
■ SANYO’s most advanced insulation system V.I.P.
®
PLUS™ enables reducing the thickness of insulation
to approximately one half compared to conventional
systems. Use of V.I.P. PLUS™ insulation material on the
front, left, and right sides enables a smaller installation
space with exceptional storage capacity to foot print
ratio.
■ Newly developed single-compressor system achieves
a space reduction and enables low-noise operation.
■ Achieves 40% higher energy conservation than
competing models with conventional insulation.
■ New refrigeration circuit without filter makes the
inconvenient customer maintenance procedure of filter
cleaning unnecessary.
■ Alarm lamp and buzzer offer secure warning of power
failure or abnormal temperature changes.
■ high and low temperature warning provides an
audible and visual alarm when the temperature
deviates more than ±5°C to ±20°C (adjustable) from
the set point.
■ Alarm ring back function ensures that buzzer will
resume operation should alarm conditions continue
after it is silenced.
■ Control panel with LED digital display for easy
operation.
EVOLUTIONARY DESIgN
SAFETY & ALARM
p
r
e
s
e
r
v
a
t
i
o
n
w w w . s a n y o b i o m e d i c a l . c o m
DMVER1206.1
MDF-C8V
Dimensions
[Unit : mm (inch)]
Specifications
Model
Temperature range
Maximum cooling performance
Exterior dimension (W x D x H)
Inner dimension
Effective capacity
Net weight
Storage capacity
Outer door/Inner door
Insulation
Cooling system
Compressor
Refrigerant
Evaporator
Alarm system MDF-C8V
-60°C to -80°C (1°C increments)
-80°C (Ambient temp. 30°C)
21.6” x 27.0” x 37.2” (550 x 685 x 945 mm)
15.9” x 19.3” x 16.9” (405 x 490 x 430 mm)
3.0cu.ft. (84 Liter)
Approx. 67 kg (148lbs.)
2” box: 42pcs. (SCR-072 x 6 racks) 3” Box: 30 pcs.
Outer Lid: 1piece, Inner Lid: 1piece
New VIP® Plus™ Rigid polyurethane foam (HC)
115V / 60 Hz / 1Phase NEMA 5-15P Plug
Rotary type, Output: 400W (1/2 HP)
HFC
Tube on sheet type
• High/Low temp. alarm (5°C to 20°C) • Power failure alarm
• Remote alarm contact: DC30V, 2A
Features
Distributed by:
SANYO Electric Co., Ltd.
SANYO Sales & Marketing Corporation
5-15, Hiyoshi-cho 2-chome, Moriguchi City, Osaka, 570-8634, Japan
Telephone: +81-6-6992-0322 Fax: +81-6-6992-9291
URL http://www.sanyo.co.jp/cmg/biomedical
©2006 SANYO Printed in Japan 2006.10. MA. SHR110
Options
We design and manufacture products in accordance with ISO9001 & 14001 requirements.
Pull-down characteristics Pull-up characteristics during power failure CO 2 backup system operation characteristics
Performance Data
40
20
0
–20
–120
–40
–60
–80
–100
0 7 6 5 2 8 3 4 1
Te
m
p
er
at
u
re
(˚
C
)
Time (hour)
20
0
–20
–40
–60
–80
–100
0 6 7 5 3 2 1 8 4
Te
m
p
er
at
u
re
(˚
C
)
Time (hour)
Central air temp. in cabinet
Ambient temp. 30˚C, No-load
5 25 20 15 10 30 35
12
10
15
0
Ti
m
e
(h
o
u
r)
Ambient temperature (˚C)
Ambient temp. and maintenance
of –70˚C by injection of LCO 2 (30kg)
More advanced insulation system:
V.I.P. PLUS ™
SANYO’s more advanced insulation system
V.I.P. PLUS
™ enables reducing the thick-
ness of insulation to approximately one half
compared to conventional systems. Small
freezers such as MDF-C8V takes full advan-
tage of this feature.
Use of V.I.P. PLUS
™ insulation material on
the front, left, and right sides enables a
smaller installation space with the highest-
class storage capacity ratio.
New cooling circuit enables filter-
less structure
A new cooling circuit makes the inconve-
nient customer maintenance procedure of
filter cleaning unnecessary.
Newly developed single-compressor
system
Use of a newly developed single-compres-
sor system achieves an approximately 40%
reduction in power consumption and en-
ables low-noise operation. MDF-C8V
Conventional
model*
Rated power consumption
340W/345W
550W/600W
MTR-C954
CVK-UB4 (I)
LCO
2
Back-up
system
Temperature Recorder
Back-up system
mounting kit
MDF-UBK
Inventory rack
SCR-072-I
SCR-053-I
MDF-C8V Conventional insulation*
Capacity
84L
Capacity
86L
5.65
sq.ft
Installation
space
*SANYO comparison
*SANYO comparison (115V, 60Hz/230V, 50Hz)
550 (21.6”)
35 (1.4”)
85
2
(3
3.
5”
)
43
0
(1
6.
9”
)
88
7
(3
4.
9”
)
94
5
(3
7.
2”
)
58 (2.3”)
44 (1.7”)
685 (27.0”)
39 (1.5”)
729 (28.7”)
405 (15.9”) 490 (19.3”)
*Appearance and specifications are subject to change without notice.
*Cooling performance is indicated by the temperature reached at the center of the freezer (at ambient temperature of 30°C with no load).
lowest temperature.
4.05
sq.ft
MDF-C8V
Dimensions
[Unit : mm (inch)]
Specifications
Model
Temperature range
Maximum cooling performance
Exterior dimension (W x D x H)
Inner dimension
Effective capacity
Net weight
Storage capacity
Outer door/Inner door
Insulation
Cooling system
Compressor
Refrigerant
Evaporator
Alarm system MDF-C8V
-60°C to -80°C (1°C increments)
-80°C (Ambient temp. 30°C)
21.6” x 27.0” x 37.2” (550 x 685 x 945 mm)
15.9” x 19.3” x 16.9” (405 x 490 x 430 mm)
3.0cu.ft. (84 Liter)
Approx. 67 kg (148lbs.)
2” box: 42pcs. (SCR-072 x 6 racks) 3” Box: 30 pcs.
Outer Lid: 1piece, Inner Lid: 1piece
New VIP® Plus™ Rigid polyurethane foam (HC)
115V / 60 Hz / 1Phase NEMA 5-15P Plug
Rotary type, Output: 400W (1/2 HP)
HFC
Tube on sheet type
• High/Low temp. alarm (5°C to 20°C) • Power failure alarm
• Remote alarm contact: DC30V, 2A
Features
Distributed by:
SANYO Electric Co., Ltd.
SANYO Sales & Marketing Corporation
5-15, Hiyoshi-cho 2-chome, Moriguchi City, Osaka, 570-8634, Japan
Telephone: +81-6-6992-0322 Fax: +81-6-6992-9291
URL http://www.sanyo.co.jp/cmg/biomedical
©2006 SANYO Printed in Japan 2006.10. MA. SHR110
Options
We design and manufacture products in accordance with ISO9001 & 14001 requirements.
Pull-down characteristics Pull-up characteristics during power failure CO 2 backup system operation characteristics
Performance Data
40
20
0
–20
–120
–40
–60
–80
–100
0 7 6 5 2 8 3 4 1
Te
m
p
er
at
u
re
(˚
C
)
Time (hour)
20
0
–20
–40
–60
–80
–100
0 6 7 5 3 2 1 8 4
Te
m
p
er
at
u
re
(˚
C
)
Time (hour)
Central air temp. in cabinet
Ambient temp. 30˚C, No-load
5 25 20 15 10 30 35
12
10
15
0
Ti
m
e
(h
o
u
r)
Ambient temperature (˚C)
Ambient temp. and maintenance
of –70˚C by injection of LCO 2 (30kg)
More advanced insulation system:
V.I.P. PLUS ™
SANYO’s more advanced insulation system
V.I.P. PLUS
™ enables reducing the thick-
ness of insulation to approximately one half
compared to conventional systems. Small
freezers such as MDF-C8V takes full advan-
tage of this feature.
Use of V.I.P. PLUS
™ insulation material on
the front, left, and right sides enables a
smaller installation space with the highest-
class storage capacity ratio.
New cooling circuit enables filter-
less structure
A new cooling circuit makes the inconve-
nient customer maintenance procedure of
filter cleaning unnecessary.
Newly developed single-compressor
system
Use of a newly developed single-compres-
sor system achieves an approximately 40%
reduction in power consumption and en-
ables low-noise operation. MDF-C8V
Conventional
model*
Rated power consumption
340W/345W
550W/600W
MTR-C954
CVK-UB4 (I)
LCO 2 Back-up
system
Temperature Recorder
Back-up system
mounting kit
MDF-UBK
Inventory rack
SCR-072-I
SCR-053-I
MDF-C8V Conventional insulation*
Capacity
84L
Capacity
86L
5.65
sq.ft
Installation
space
*SANYO comparison
*SANYO comparison (115V, 60Hz/230V, 50Hz)
550 (21.6”)
35 (1.4”)
85
2
(3
3.
5”
)
43
0
(1
6.
9”
)
88
7
(3
4.
9”
)
94
5
(3
7.
2”
)
58 (2.3”)
44 (1.7”)
685 (27.0”)
39 (1.5”)
729 (28.7”)
405 (15.9”) 490 (19.3”)
*Appearance and specifications are subject to change without notice.
*Cooling performance is indicated by the temperature reached at the center of the freezer (at ambient temperature of 30°C with no load).
lowest temperature.
4.05
sq.ft
MDF-C8V
Dimensions [Unit : mm (inch)]
Specifications
Model
Temperature range
Maximum cooling performance
Exterior dimension (W x D x H)
Inner dimension
Effective capacity
Net weight
Storage capacity
Outer door/Inner door
Insulation
Cooling system
Compressor
Refrigerant
Evaporator
Alarm system MDF-C8V
-60°C to -80°C (1°C increments)
-80°C (Ambient temp. 30°C)
21.6” x 27.0” x 37.2” (550 x 685 x 945 mm)
15.9” x 19.3” x 16.9” (405 x 490 x 430 mm)
3.0cu.ft. (84 Liter)
Approx. 67 kg (148lbs.)
2” box: 42pcs. (SCR-072 x 6 racks) 3” Box: 30 pcs.
Outer Lid: 1piece, Inner Lid: 1piece
New VIP® Plus™ Rigid polyurethane foam (HC)
115V / 60 Hz / 1Phase NEMA 5-15P Plug
Rotary type, Output: 400W (1/2 HP)
HFC
Tube on sheet type
• High/Low temp. alarm (5°C to 20°C) • Power failure alarm
• Remote alarm contact: DC30V, 2A
Features
Distributed by:
SANYO Electric Co., Ltd.
SANYO Sales & Marketing Corporation
5-15, Hiyoshi-cho 2-chome, Moriguchi City, Osaka, 570-8634, Japan
Telephone: +81-6-6992-0322 Fax: +81-6-6992-9291
URL http://www.sanyo.co.jp/cmg/biomedical
©2006 SANYO Printed in Japan 2006.10. MA. SHR110
Options
We design and manufacture products in accordance with ISO9001 & 14001 requirements.
Pull-down characteristics Pull-up characteristics during power failure CO
2
backup system operation characteristics
Performance Data
40
20
0
–20
–120
–40
–60
–80
–100
0 7 6 5 2 8 3 4 1
Te
m
p
er
at
u
re
(˚
C
)
Time (hour)
20
0
–20
–40
–60
–80
–100
0 6 7 5 3 2 1 8 4
Te
m
p
er
at
u
re
(˚
C
)
Time (hour)
Central air temp. in cabinet
Ambient temp. 30˚C, No-load
5 25 20 15 10 30 35
12
10
15
0
Ti
m
e
(h
o
u
r)
Ambient temperature (˚C)
Ambient temp. and maintenance
of –70˚C by injection of LCO 2 (30kg)
More advanced insulation system:
V.I.P. PLUS ™
SANYO’s more advanced insulation system
V.I.P. PLUS
™ enables reducing the thick-
ness of insulation to approximately one half
compared to conventional systems. Small
freezers such as MDF-C8V takes full advan-
tage of this feature.
Use of V.I.P. PLUS
™ insulation material on
the front, left, and right sides enables a
smaller installation space with the highest-
class storage capacity ratio.
New cooling circuit enables filter-
less structure
A new cooling circuit makes the inconve-
nient customer maintenance procedure of
filter cleaning unnecessary.
Newly developed single-compressor
system
Use of a newly developed single-compres-
sor system achieves an approximately 40%
reduction in power consumption and en-
ables low-noise operation. MDF-C8V
Conventional
model*
Rated power consumption
340W/345W
550W/600W
MTR-C954
CVK-UB4 (I)
LCO 2 Back-up
system
Temperature Recorder
Back-up system
mounting kit
MDF-UBK
Inventory rack
SCR-072-I
SCR-053-I
MDF-C8V Conventional insulation*
Capacity
84L
Capacity
86L
5.65
sq.ft
Installation
space
*SANYO comparison
*SANYO comparison (115V, 60Hz/230V, 50Hz)
550 (21.6”)
35 (1.4”)
85
2
(3
3.
5”
)
43
0
(1
6.
9”
)
88
7
(3
4.
9”
)
94
5
(3
7.
2”
)
58 (2.3”)
44 (1.7”)
685 (27.0”)
39 (1.5”)
729 (28.7”)
405 (15.9”) 490 (19.3”)
*Appearance and specifications are subject to change without notice.
*Cooling performance is indicated by the temperature reached at the center of the freezer (at ambient temperature of 30°C with no load).
lowest temperature.
4.05
sq.ft
MDF-C8V
Dimensions [Unit : mm (inch)]
Specifications
Model
Temperature range
Maximum cooling performance
Exterior dimension (W x D x H)
Inner dimension
Effective capacity
Net weight
Storage capacity
Outer door/Inner door
Insulation
Cooling system
Compressor
Refrigerant
Evaporator
Alarm system MDF-C8V
-60°C to -80°C (1°C increments)
-80°C (Ambient temp. 30°C)
21.6” x 27.0” x 37.2” (550 x 685 x 945 mm)
15.9” x 19.3” x 16.9” (405 x 490 x 430 mm)
3.0cu.ft. (84 Liter)
Approx. 67 kg (148lbs.)
2” box: 42pcs. (SCR-072 x 6 racks) 3” Box: 30 pcs.
Outer Lid: 1piece, Inner Lid: 1piece
New VIP® Plus™ Rigid polyurethane foam (HC)
115V / 60 Hz / 1Phase NEMA 5-15P Plug
Rotary type, Output: 400W (1/2 HP)
HFC
Tube on sheet type
• High/Low temp. alarm (5°C to 20°C) • Power failure alarm
• Remote alarm contact: DC30V, 2A
Features
Distributed by:
SANYO Electric Co., Ltd.
SANYO Sales & Marketing Corporation
5-15, Hiyoshi-cho 2-chome, Moriguchi City, Osaka, 570-8634, Japan
Telephone: +81-6-6992-0322 Fax: +81-6-6992-9291
URL http://www.sanyo.co.jp/cmg/biomedical
©2006 SANYO Printed in Japan 2006.10. MA. SHR110
Options
We design and manufacture products in accordance with ISO9001 & 14001 requirements.
Pull-down characteristics Pull-up characteristics during power failure CO
2
backup system operation characteristics
Performance Data
40
20
0
–20
–120
–40
–60
–80
–100
0 7 6 5 2 8 3 4 1
Te
m
p
er
at
u
re
(˚
C
)
Time (hour)
20
0
–20
–40
–60
–80
–100
0 6 7 5 3 2 1 8 4
Te
m
p
er
at
u
re
(˚
C
)
Time (hour)
Central air temp. in cabinet
Ambient temp. 30˚C, No-load
5 25 20 15 10 30 35
12
10
15
0
Ti
m
e
(h
o
u
r)
Ambient temperature (˚C)
Ambient temp. and maintenance
of –70˚C by injection of LCO 2 (30kg)
More advanced insulation system:
V.I.P. PLUS ™
SANYO’s more advanced insulation system
V.I.P. PLUS
™ enables reducing the thick-
ness of insulation to approximately one half
compared to conventional systems. Small
freezers such as MDF-C8V takes full advan-
tage of this feature.
Use of V.I.P. PLUS
™ insulation material on
the front, left, and right sides enables a
smaller installation space with the highest-
class storage capacity ratio.
New cooling circuit enables filter-
less structure
A new cooling circuit makes the inconve-
nient customer maintenance procedure of
filter cleaning unnecessary.
Newly developed single-compressor
system
Use of a newly developed single-compres-
sor system achieves an approximately 40%
reduction in power consumption and en-
ables low-noise operation. MDF-C8V
Conventional
model*
Rated power consumption
340W/345W
550W/600W
MTR-C954
CVK-UB4 (I)
LCO 2 Back-up
system
Temperature Recorder
Back-up system
mounting kit
MDF-UBK
Inventory rack
SCR-072-I
SCR-053-I
MDF-C8V Conventional insulation*
Capacity
84L
Capacity
86L
5.65
sq.ft
Installation
space
*SANYO comparison
*SANYO comparison (115V, 60Hz/230V, 50Hz)
550 (21.6”)
35 (1.4”)
85
2
(3
3.
5”
)
43
0
(1
6.
9”
)
88
7
(3
4.
9”
)
94
5
(3
7.
2”
)
58 (2.3”)
44 (1.7”)
685 (27.0”)
39 (1.5”)
729 (28.7”)
405 (15.9”) 490 (19.3”)
*Appearance and specifications are subject to change without notice.
*Cooling performance is indicated by the temperature reached at the center of the freezer (at ambient temperature of 30°C with no load).
lowest temperature.
4.05
sq.ft
MDF-C8V
Dimensions
[Unit : mm (inch)]
Specifications
Model
Temperature range
Maximum cooling performance
Exterior dimension (W x D x H)
Inner dimension
Effective capacity
Net weight
Storage capacity
Outer door/Inner door
Insulation
Cooling system
Compressor
Refrigerant
Evaporator
Alarm system MDF-C8V
-60°C to -80°C (1°C increments)
-80°C (Ambient temp. 30°C)
21.6” x 27.0” x 37.2” (550 x 685 x 945 mm)
15.9” x 19.3” x 16.9” (405 x 490 x 430 mm)
3.0cu.ft. (84 Liter)
Approx. 67 kg (148lbs.)
2” box: 42pcs. (SCR-072 x 6 racks) 3” Box: 30 pcs.
Outer Lid: 1piece, Inner Lid: 1piece
New VIP® Plus™ Rigid polyurethane foam (HC)
115V / 60 Hz / 1Phase NEMA 5-15P Plug
Rotary type, Output: 400W (1/2 HP)
HFC
Tube on sheet type
• High/Low temp. alarm (5°C to 20°C) • Power failure alarm
• Remote alarm contact: DC30V, 2A
Features
Distributed by:
SANYO Electric Co., Ltd.
SANYO Sales & Marketing Corporation
5-15, Hiyoshi-cho 2-chome, Moriguchi City, Osaka, 570-8634, Japan
Telephone: +81-6-6992-0322 Fax: +81-6-6992-9291
URL http://www.sanyo.co.jp/cmg/biomedical
©2006 SANYO Printed in Japan 2006.10. MA. SHR110
Options
We design and manufacture products in accordance with ISO9001 & 14001 requirements.
Pull-down characteristics Pull-up characteristics during power failure CO 2 backup system operation characteristics
Performance Data
40
20
0
–20
–120
–40
–60
–80
–100
0 7 6 5 2 8 3 4 1
Te
m
p
er
at
u
re
(˚
C
)
Time (hour)
20
0
–20
–40
–60
–80
–100
0 6 7 5 3 2 1 8 4
Te
m
p
er
at
u
re
(˚
C
)
Time (hour)
Central air temp. in cabinet
Ambient temp. 30˚C, No-load
5 25 20 15 10 30 35
12
10
15
0
Ti
m
e
(h
o
u
r)
Ambient temperature (˚C)
Ambient temp. and maintenance
of –70˚C by injection of LCO 2 (30kg)
More advanced insulation system:
V.I.P. PLUS ™
SANYO’s more advanced insulation system
V.I.P. PLUS
™ enables reducing the thick-
ness of insulation to approximately one half
compared to conventional systems. Small
freezers such as MDF-C8V takes full advan-
tage of this feature.
Use of V.I.P. PLUS
™ insulation material on
the front, left, and right sides enables a
smaller installation space with the highest-
class storage capacity ratio.
New cooling circuit enables filter-
less structure
A new cooling circuit makes the inconve-
nient customer maintenance procedure of
filter cleaning unnecessary.
Newly developed single-compressor
system
Use of a newly developed single-compres-
sor system achieves an approximately 40%
reduction in power consumption and en-
ables low-noise operation. MDF-C8V
Conventional
model*
Rated power consumption
340W/345W
550W/600W
MTR-C954
CVK-UB4 (I)
LCO
2
Back-up
system
Temperature Recorder
Back-up system
mounting kit
MDF-UBK
Inventory rack
SCR-072-I
SCR-053-I
MDF-C8V Conventional insulation*
Capacity
84L
Capacity
86L
5.65
sq.ft
Installation
space
*SANYO comparison
*SANYO comparison (115V, 60Hz/230V, 50Hz)
550 (21.6”)
35 (1.4”)
85
2
(3
3.
5”
)
43
0
(1
6.
9”
)
88
7
(3
4.
9”
)
94
5
(3
7.
2”
)
58 (2.3”)
44 (1.7”)
685 (27.0”)
39 (1.5”)
729 (28.7”)
405 (15.9”) 490 (19.3”)
*Appearance and specifications are subject to change without notice.
*Cooling performance is indicated by the temperature reached at the center of the freezer (at ambient temperature of 30°C with no load).
lowest temperature.
4.05
sq.ft
MDF-C8V
Dimensions
[Unit : mm (inch)]
Specifications
Model
Temperature range
Maximum cooling performance
Exterior dimension (W x D x H)
Inner dimension
Effective capacity
Net weight
Storage capacity
Outer door/Inner door
Insulation
Cooling system
Compressor
Refrigerant
Evaporator
Alarm system MDF-C8V
-60°C to -80°C (1°C increments)
-80°C (Ambient temp. 30°C)
21.6” x 27.0” x 37.2” (550 x 685 x 945 mm)
15.9” x 19.3” x 16.9” (405 x 490 x 430 mm)
3.0cu.ft. (84 Liter)
Approx. 67 kg (148lbs.)
2” box: 42pcs. (SCR-072 x 6 racks) 3” Box: 30 pcs.
Outer Lid: 1piece, Inner Lid: 1piece
New VIP® Plus™ Rigid polyurethane foam (HC)
115V / 60 Hz / 1Phase NEMA 5-15P Plug
Rotary type, Output: 400W (1/2 HP)
HFC
Tube on sheet type
• High/Low temp. alarm (5°C to 20°C) • Power failure alarm
• Remote alarm contact: DC30V, 2A
Features
Distributed by:
SANYO Electric Co., Ltd.
SANYO Sales & Marketing Corporation
5-15, Hiyoshi-cho 2-chome, Moriguchi City, Osaka, 570-8634, Japan
Telephone: +81-6-6992-0322 Fax: +81-6-6992-9291
URL http://www.sanyo.co.jp/cmg/biomedical
©2006 SANYO Printed in Japan 2006.10. MA. SHR110
Options
We design and manufacture products in accordance with ISO9001 & 14001 requirements.
Pull-down characteristics Pull-up characteristics during power failure CO
2
backup system operation characteristics
Performance Data
40
20
0
–20
–120
–40
–60
–80
–100
0 7 6 5 2 8 3 4 1
Te
m
p
er
at
u
re
(˚
C
)
Time (hour)
20
0
–20
–40
–60
–80
–100
0 6 7 5 3 2 1 8 4
Te
m
p
er
at
u
re
(˚
C
)
Time (hour)
Central air temp. in cabinet
Ambient temp. 30˚C, No-load
5 25 20 15 10 30 35
12
10
15
0
Ti
m
e
(h
o
u
r)
Ambient temperature (˚C)
Ambient temp. and maintenance
of –70˚C by injection of LCO 2 (30kg)
More advanced insulation system:
V.I.P. PLUS ™
SANYO’s more advanced insulation system
V.I.P. PLUS
™ enables reducing the thick-
ness of insulation to approximately one half
compared to conventional systems. Small
freezers such as MDF-C8V takes full advan-
tage of this feature.
Use of V.I.P. PLUS
™ insulation material on
the front, left, and right sides enables a
smaller installation space with the highest-
class storage capacity ratio.
New cooling circuit enables filter-
less structure
A new cooling circuit makes the inconve-
nient customer maintenance procedure of
filter cleaning unnecessary.
Newly developed single-compressor
system
Use of a newly developed single-compres-
sor system achieves an approximately 40%
reduction in power consumption and en-
ables low-noise operation. MDF-C8V
Conventional
model*
Rated power consumption
340W/345W
550W/600W
MTR-C954
CVK-UB4 (I)
LCO
2
Back-up
system
Temperature Recorder
Back-up system
mounting kit
MDF-UBK
Inventory rack
SCR-072-I
SCR-053-I
MDF-C8V Conventional insulation*
Capacity
84L
Capacity
86L
5.65
sq.ft
Installation
space
*SANYO comparison
*SANYO comparison (115V, 60Hz/230V, 50Hz)
550 (21.6”)
35 (1.4”)
85
2
(3
3.
5”
)
43
0
(1
6.
9”
)
88
7
(3
4.
9”
)
94
5
(3
7.
2”
)
58 (2.3”)
44 (1.7”)
685 (27.0”)
39 (1.5”)
729 (28.7”)
405 (15.9”) 490 (19.3”)
*Appearance and specifications are subject to change without notice.
*Cooling performance is indicated by the temperature reached at the center of the freezer (at ambient temperature of 30°C with no load).
lowest temperature.
4.05
sq.ft
MDF-U7386S
Dimensions
[Unit : mm (inch)]
Specifications
Model
Temperature range
Maximum cooling
performance
Exterior dimensions
(W x D x H)
Interior dimensions
(W x D x H)
Net weight
Effective capacity
Shelf
Access port
Compressor
Refrigerant
Alarm
Remote alarm contact
Accessories
Power Requirement
MDF-U7386SC
–50°C to –86°C (1°C increment)
–86°C
(Ambient temp. 30°C)
1130 x 875 x 1990mm
(44.5” x 34.4” x 78.3”)
870 x 600 x 1280mm
(34.2” x 23.6” x 50.4”)
Approx. 355kg (783 lbs.)
668 L (23.5 cu.ft.)
Stainless steel, Adjustable,
3 shelves, W848 x D533mm,
Max. load: 50kg (110 lbs.)/shelf
17mm diameter, 3 locations
(back, bottom left/right corner)
Hermetic type, Output: 1100 W
(high stage), 1100 W (low stage)
HFC refrigerants
High/low temperature,
Power failure, Filter check,
Battery check
Allowable contact capacity:
DC 30V, 2A
1 set of keys, 1 scraper
220V / 60 Hz
Built-in voltage booster
*Appearance and specifications are subject to change without notice.
ISO 9001 & 14001 certified
Distributed by:
Performance Data
Options
Circular recorder
MTR-C954
Strip Chart Recorder
MTR-85H
Recorder mounting
bracket
MDF-S3085
(for MTR-85H)
LCO 2 backup system
CVK-UB2 (I)
LN 2 backup system
CVK-UBN2
40
20
0
–20
–40
–60
–80
–100
0 2 4 6 8 10
5 0
12
35 25 20
14
15 10
Te
m
p
er
at
u
re
(°
C
)
40
20
0
–20
–40
–60
–80
–100
0 2 4 6 8 10 12 14
Te
m
p
er
at
u
re
(°
C
)
Time (hour)
Time (hour)
Pull-up characteristics
during power failure
30
12
8
6
4
2
10
0
T
im
e
(h
o
u
r)
Ambient temperature (°C)
CO
2
backup system operation
characteristics
Central air temp. in cabinet
Ambient temp. 30°C, No-load
Ambient temp. and maintenance
of –70°C by injection of LCO
2 (30kg)
Inventory rack
SUR-624-I
Rack Capacity: 24
SANYO Electric Co., Ltd.
SANYO Sales & Marketing Corporation
5-15, Hiyoshi-cho 2-chome, Moriguchi City, Osaka, 570-8634, Japan
Telephone: +81-6-6992-0322 Fax: +81-6-6992-9291
URL http://www.sanyo.co.jp/cmg/biomedical
©2006 SANYO Printed in Japan 2006.3. MA. SHR101
18
(0.7)
48
(1.9) 1130 (44.5)
870 (34.3)
1196 (47.1)
1540 (60.6)
450 (17.7)
1990 (78.3)
605.5 (23.8)
105
(4.1)
1280 (50.4)
130 (5.1)
130 (5.1)
140
(5.5)
795 (31.3)
867 (34.1)
11
(0.4)
1625 (64)
Features
EVOLUTIONARY DESIGN
• The newly developed refrigeration system
and the freezer structure offer a quiet
experimental environment.
• Achieves 10% higher energy conservation
than previous model. (For model rated 220V, 50Hz)
• The newly developed back cover combined
with new aerodynamically designed and
placed components in the refrigeration
compartment provide superior air flow,
making it possible
to drastically
reduce the stress
to the freezer and
contributing to
excellent durability.
• Two independent and insulated inner doors
prevent cold air leakage.
ACCESSIBILITY
• A new beak style inner
door latch tightly closes
the inner door against
the freezer frame. It
also helps make
opening and closing the door smoother.
• The condenser filter is situated at the
bottom right side of the front panel to make
filter removal and cleaning easier.
Back
cover
Compressors
Front
Rear Air
SAFETY
• Alarm lamp and buzzer offer secure warning
of power failure or abnormal temperature
increase.
• High and low temperature warning provides
an audible and visual alarm when the
temperature deviates more than 5°C to
20°C (adjustable) from the set point.
• Alarm ring back function ensures that buzzer
will resume operation, should alarm
conditions continue after it is silenced.
• Microprocessor-controlled filter-clog check
function protects the refrigeration circuit.
• New rugged, one-handed
outer door latch has a hole to
allow a padlock to securely
protect valuable samples.
• Control panel with
digital display for easy
operation.
Pull-down characteristics
*Cooling performance is indicated by the temperature reached at
the center of the freezer (at ambient temperature of 30C with no
load). In order to use the freezer at a stable temperature for a long
time, it is recommended that the temperature be set to at least 5C
higher than the indicated lowest temperature.
In addition, depending on the usage conditions, it may not be
possible to reach the indicated lowest temperature.