Senco SN902XP - Manual (Page 2)

Cap Exhaust –
Directs exhaust downward
Low Profile Design –
Easily fits between studs & joists
Aluminum Housing –
Lightweight,
superior durability
Aggressive Toenail Safety –
Teeth grip studs with real bite for
precise positioning
Patented TrueDrive TM Magazine –
Reduced jams and mis-feeds
Rear Two-Step Loading –
Quick and easy for right or
left handers
Uses Up to 15% Less AIr –
Highly efficient internal design,
runs great with 1/4” line fittings
®
©2008 Senco Products, Inc. www.senco.com
Thumbwheel Adjustable
Depth-of-Drive –
Drives nails to a consistent
and controllable depth
*Choose the right actuation mode!
Sequential Actuation (also known as restrictive trigger or trigger fire) operates in
the following a sequence - depress the safety element at the nose of tool against the
work surface then pull the trigger. After each fastener is driven, release the trigger
and lift the tool off the work surface before starting the sequence again. This trigger
is recommended and acceptable for most applications.
Contact Actuation (also known as dual action, bounce or bottom fire) operates in
the following sequence- pull the trigger first and keep the trigger pulled while
moving the tool along the work surface with a bouncing motion, depressing the
safety element at the nose of the tool against the work surface where the fastener is
to be driven. This trigger is recommended for use by trained professionals only in
high production or volume applications.
Always read the Operators Manual and Safety Instructions with all tools to
ensure proper use and safety precautions. For additional information on
trigger systems and how SENCO will save you time, reduce costs, and
increase quality, call our toll-free Action Line 800-543-4596, or visit our
web site at www.senco.com.
Full Comfort Grip –
Resilient grip reduces fatigue
Unique Features of the SN902XP
Contact or Sequential Trigger
Actuation Switch – Patented drive
selector*
Framing Nailer
Full Round Head SN902XP