SWR Sound Mini-Mo' Preamp With Mo' Control 2 Master Footswitch Controller - Manual (Page 5)

MINI-MO’ OWNER’S MANUAL • 2
The amount of tone and patching flexibility available in the Mini-Mo’ Preamp/Mo' Control 2 system is
impossible to describe in just a paragraph, but we'll try. 13 audio outputs; 6 post-master, 7 pre-master;
11 unbalanced and 2 balanced. The ability to split the signal into clean and dirty channels by using the
Dual Mode function. Run audio to a stereo power amp, a mono power amp, several power amps at
once, a front-of-house mixing board, a studio console, an external effects unit, store preset groups of
effects, make Mo' Control 2 a MIDI controller and automatically add reverb or delay to existing
combinations of Mini-Mo’ effects…or just run it clean into your power amp of choice, and experience
the SWR Sound for yourself. With extra in reserve.
But please read the manual first, thoroughly and completely, so that you can realize the practically
limitless potential of the SWR Mini-Mo' Preamp/Mo' Control 2 system. This way we can help you find
your voice, your vision, your sound. And it's our privilege as a company to be there with you along for the
ride.
Sincerely,
SWR
NOTE NOTE: Please take a moment to verify that the following items were included in your SWR Mini-Mo’
packaging: Mini-Mo' Preamp, Mo' Control 2 Master Footswitch, AC Cable, 25 ft. HD15 cable, SWR
Catalog.
MINI-MO’ PREAMP - FRONT PANEL FEATURES
•Dual independent input jacks compatible with both passive and active instruments
•Tuning Mute Switch with red LED indicator
•Preamp Volume Control with red LED peak clipping indicator
•Variable Limiter/Leveler Control with yellow LED indicator
•Aural Enhancer Control
•Treble Level Control
•Midrange Level Control
•Midrange Frequency Control